SOUNDOLIER® INFRARED REPEATER SYSTEM AND DEVICES

M-l Series, M-1TT, F-1, M-1CB4A, PS-M12

F-1 M-1JW* M-1 *(Shown with decora style cover plate. Order separately

M-1TT

M-1CB4A

PS-M12

APPLICATIONS

Enjoy the convenience of remote control anywhere... any time! Soundolier offers three repeater styles that let you create remote controls that meet your lifestyle. Wall mounted decora-style Model M-1J comes in white or ivory and features a green LED for visual feedback of system status. Concealed mounting Model M-l features a lens-only configuration for hidden IR control from the ceiling, wall, or anywhere with amounting depth of 2-¼". Tabletop mounting kit Model M-1TT is a surface mounting enclosure finished in black for housing the M-l infrared repeater (order separately).

MICRO INFRARED REPEATERS & FLASHERS

M-I Series. Soundolier IR repeaters allow the operation of virtually any IP-controlled A/V component from multiple room locations. The M-l Series repeater will receive the IR signal and rebroadcast it to the small F-1 flasher LED positioned on the front of each A/V component. The F-1 forwards the signal to the source component's IR receiver. These micro repeaters feature an attractive, flush, white lens that blends with any white surface. Their high sensitivity enables use within a 40-foot range with fast reaction time and minimal interference. Repeaters are available installed on a white or ivory decorator-style subplate (cover plate not included) or separately for flush-mounting in a ceiling, wall, cabinet, or speaker grille. Model M-l conceals behind the grille of Architectural Series in-wall speakers (see SL1-1599) to provide custom IR control.

F-1 Series. Small F-1 flasher LEDs are shipped with an adhesive backing and 1/8" mini plugs for connection to all IR-controlled A/V components. Up to four flasher units may be connected to a single M-l repeater using two M-1CB4A connector blocks or any standard adapter (by others). (Note: some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1 flashers would not be necessary.)

M-1TT. Tabletop mounting kit Model M-1TT is a surface enclosure for the M-l infra red repeater. Compact housing is finished in black. (Order M-l repeater separately).

*Decor style devices require cover plate (This is a standard item typically ordered in bulk with other electrical supplies)

**Order Model M-l separately

STAND-ALONE IR REPEATER SYSTEM

M-1CB4A. For installation flexibility, the M-1CB4A amplified connector block is offered as a plug-in interface device that provides connections for an M-1 Series repeater, four F-1 flashers, and power supply Model PS-M12. This configuration allows IR operation of up to four A/V components from up to four room locations. The M-1CB4A offers 1/8" mini jacks for power supply Model PS-M12 and up to four F-1 flashers; it also provides terminals for wiring up to four M-l repeaters(rooms) in parallel fashion and a data jack for connecting a mini-pin IR source or another M-1CB4A. The units amplified circuit design supplies clear, strong IR data to source components.

This stand-alone IR repeater system requires: one M-l repeater in each remote room location, one M-1CB4A for every four A/V components, a PS-M12 power supply, and one F-1 flasher for each A/V component. For installations which require control of more than four components or transmission from more than four rooms, multiple M-1CB4A blocks may be used.

PS-M12. Compact Model PS-M12 powers up to four F-1 flashers. Unit is a UL Listed 12-volt DC, 200 mA supply with a 6-foot cord. The required input is 120 volts.

ATLAS / SOUNDOLIER ATAPCO SECURITY & COMMUNICATIONS GROUP

1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE: (314) 349-3110 / FAX: (314) 349-1251

©1997 Atlas/Soundolier Printed in U.S.A. 01197 SL5-1601

Specifications are subject to change without notice