INTERCOM LOUDSPEAKER STATIONS

SERIES 3000, E-12, and E-13

2 gang stainless steel plate 3" Diameter loudspeaker. 3.4 Lbs. (1.5kg.)*	3 gang stainless steel plate 3"Diameter loudspeaker. 4 Lbs. (1.8 Kg.)*

2 gang stainless steel plate 3"Diameter loudspeaker 6 point terminal strip. One push button switch. 3.4Lbs. (1.5Kg.)*	3 gang stainless steel plate 3"Diameter loudspeaker 6 point terminal strip. One push button switch. 4Lbs. (1.8Kg.)*
Same with style A lettering	Same with style A lettering
Same with style G lettering	Same with style E lettering

2 gang stainless steel plate 3'Diameter loudspeaker 6 point terminal strip. Two push button switches. 3.7Lbs. (1.7Kg.)*	3 gang stainless steel plate 3"Diameter loudspeaker 6 point terminal strip Two push button switches. 4.4 Lbs. (2 Kg.)*
Same with style B lettering	Same with style B lettering
	Same with Style F lettering

*Adding Transformers (-T70) or (-T25) will add an additional .5 lb (.22kg) to the Intercom weight

GENERAL DESCRIPTION

Atlas/Soundolier intercom stations provide service reliability, attractive appearance and cost efficient installation. Factory assemblies are comprised of a high-quality 3" diameter loud- speaker with permanent magnet riveted to a two or three gang brushed stainless steel mounting plate. For call origination or privacy control functions, stations are offered with one or two SPDT push-button switches. For distributed system application, models are also available with factory-installed 70.7 or 25 volt transformer (suffix model with -T70 or -T25). Optional stamped and paint filled lettering ("CALL" and/or "TALK") is also available (see below for style designation).

ASSEMBLIES FOR RECESSED INSTALLATION

Series 3000 intercom stations are two and three gang recessed mounting assemblies which attach to conduit outlet boxes utilizing plaster rings of the required size or to masonry type boxes with the proper dimensions. Total depth required is 2-¼ inches. All models are shipped factory wired and ready to install.

ENCLOSURES FOR SURFACE INSTALLATION

UL Listed enclosure Models E-12 and E-13 provide for surface installation of Series 3000 intercom stations. Two and three gang units respectively, are finished in neutral grey epoxy. Wiring access is provided by a combination knockout in the enclosure rear and a ½" knockout in the bottom. Unit is also equipped with two mounting holes for standard outlet box installation.

LETTERING STYLES

All lettering shown below is 3/16"H, stamped and black paint filled. See model descriptions on the left for available lettering styles.

ATLAS/SOUNDOLIER ATAPCO SECURITY & COMMUNICATIONS GROUP

1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE: (314) 349-3110 / FAX: (314) 349-1251 ^^

©1997 Atlas/Soundolier Printed in U.S.A. 00297 SL8-1106

Specifications are subject to change without notice