PROFRESSIONAL OMNI-PURPOSE® LOUDSPEAKERS

AP-15/AP-30 APF-15 APC-30T APR-30T APT-34T APW-30T

GENERAL DESCRIPTION—AP SERIES

AP Series environment-resistant loudspeakers are the world standard for voice, music, and signal transmission in indoor and outdoor public address, intercom, security, and industrial signal system application Cost-effective, all-purpose units incorporate high-efficiency compression drivers to project through high ambient sound levels and to cover tong distances at minimum installed cost. U.S.-made models assure superior intelligibility and service reliability. Weatherproof units are metal and plastic construction.

AP Series transformer-equipped models now include a 3-way 25/70.7/100V transformer except Model
AP-30T-25 which is 25V.

INDUSTRY STANDARD OMNI-PURPOSE LOUDSPEAKERS

AP-15/AP-30 Series. Patented environment-resistant, double re-entrant loudspeakers are available in 15 and 30-watt versions for medium and high-powered sound distribution. Selection includes 4-ohm models for auxiliary and mobile loudspeaker use, 45-ohm models for intercom application, a 25/70.7/ 100-volt transformer models with screwdriver-adjust power tap selection for a variety of sound a signaling applications. All include the Omni-Purpose» bracket for vertical/horizontal positioning a have provisions for surface/strap mounting to pillars and I-beams. Grey or beige (C) baked epoxy finish.

RECESSED FLANGE-MOUNTING LOUDSPEAKERS

APF Series. High-efficiency, 15-watt loudspeakers are designed for recessed installation in sound a alarm system applications. Range mounting units may be installed flush to a panel or recessed into wall or ceiling surfaces. For aesthetic consideration and retrofit convenience of existing cone loudspeaker installations, models will accept any 6" or 8'' diameter recessed mounting baffle (Note: 8'' baffle mounting requires model MK-2 mounting kit. See APF Series accessories, this section.) Model APF-15 installs inside a 4" deep opening. Model APh-15T fits inside a yk' deep minimum opening and includes combination 25/70.7/ 100-volt transformer with screwdriver-adjust power tap selection. Finished in grey baked epoxy.

WIDE-ANGLE LOUDSPEAKER

APC-30T. High-power 30-watt loudspeaker with extended low frequency response is equipped with wide-angle molded plastic bell for sound directivity. Transformer includes a screwdriver-adjust power selection with a 45-ohm tap for intercom and talk-back use. It also features the Omni-Purpose^® bracket for vertical/horizontal positioning and have provisions for surface/strap mounting to pillars and I-beams Grey baked epoxy finish.

RADIAL LOUDSPEAKER FOR SUSPENSION MOUNTING

APR-30T. 30-watt loudspeaker with 40" circular sound dispersion is designed for overhead installation in industrial, transportation, manufacturing, service, recreation and sports centers. Equipped with a combination 25170.7/ 100-volt transformer with screwdriver-adjust power selection including a 45-ohm tap. Provision for suspended ceiling installation is included, finished in grey baked epoxy.

BI-DIRECTIONAL TWIN HORN

APT-34T. Surface-mounting loudspeaker with bi-directional sound dispersion provides concentration coverage in corridors, stairwells, and walkways in commercial, institutional and industrial application Twin horn assembly delivers 30 watts of power with a single compression driver and provides 100° sound dispersion in each direction. Includes the Omni-Purpose^® bracket and provisions for surface/sir. mounting. Equipped with a combination 25/70.7/ 100-volt transformer with screwdriver-adjust power selection including a 45-ohm tap. Grey baked epoxy finish.

SURFACE OR FLANGE-MOUNTING WIDE ANGLE

APW Series. High-efficiency 15 and 30-watt loudspeakers provide optimum directed and wide area sound dispersion and high intelligibility for application in medium and high-power commercial sound, intercom and protective signal systems. The exponential flare-rate of the projector bell increases high frequency dispersion while retaining the space relationship required for good low-frequency reproduction All models include the Omni-Purpose^® mounting bracket and provisions for surface or strap mounting Additionally, the APW Series maybe recessed into a 6-1/2" x 11" baffle cutout and mounted to any flat baffle surface with four screws. Combination 25/70.7/ 100-volt transformer features screwdriver adjust power selection which includes a 45-ohm tap. Finished in grey baked epoxy. ABS and metal environment-resistant construction.

*Measured at Rated Power-1 Meter (avg)
** Angle Shown -6 dB. 2 kHz Octave Band
*** 15 Watt Xfmr Power Taps 25V: 48, .94, 1.8, 7.5, 15; 70.7V: 1,2,3.8,7.5,15; 100V: 2,4.7.7,15,X
**** 30 Watt Xfmr Power Taps: 25V: 0.9,1.8, 3.7,7.5,15: 70.7V: 2,3.8,7.5,15,30:100V: 4,1.7,15,30,X
*****AP-3CT.25 Xfmr Power Taps: 25V: 1,2,2.5,5,7.5,15,30