Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Atlas/Soundolier  Atlas Soundolier Communication Products  

Atlas Soundolier Communication Products - Page 21

 

 

HIGH-EFFICIENCY COMPRESSION DRIVER UNITS
 

PD-30T PD-5VT

PD-5VH PD-60TA

30,40, AND 60-WATT DRIVERS

PD Series. Competitively priced compression drivers provide accurate sound reproduction, optimum intelligibility and dependable performance in commercial sound, high-power music and public address loudspeaker systems. Models are equally suited for application with Atlas/Soundolier projector horns as replacement drivers for use with standard 1-3/8" - 18 male thread horns.

MODEL POWER RATING PLANE WAVE FREQ. RESPONSE LOW FREQ. LIMIT @ FULL POWER SOUND LEVEL ±5 dB)* IMPEDANCE
PD30 30 W 300 - 3.900 Hz

(±5 dB)

500 Hz 113.6 (avg) 300-3.900 Hz 8 (Nom.)
PD-30-16 16 (Nom.)
PD-30T **
PD-5VH 40 W 110-4,100 Hz (±5 dB) 250 Hz 110.7 (avg) 110-4.100 Hz 16 (Nom.)
PD-5VT 40 W 190-4,200 Hz (±5 dB) 300 Hz 111.2 (avg) 190-4,200 Hz ***
PD-60A 60 W 100-3.700 Hz

(±5 dB)

300 Hz 112.7 (avg) 100-3,700 Hz 16 (Nom.)
PD-60TA ****

*Measured on a plane wave tube at 1 mW
**30Watts Xfmr, Power Taps: 70.7V: 1.8,3.7,7.5,15,30
***40 Watts Xfmr, Power Taps: 70.7V: 2.5,5,10,20,40
****60 Watts Xfmr, Power Taps: 70.7V: 2.5,5,10,20,40,60

UNIVERSAL DRIVER-TO-HORN ADAPTERS

DA-FH YDA-TH

DA-FH. Compression driver adapter for flange-terminated sound projectors (1 3/8"-18F to 1" throat bolt-on)

YDA-TH. Dual adapter for combining two compression drivers to one sound projector. (Two 1-3/8" -18 F thread to 1-3/8"-18M thread).

EXPLOSION-PROOF LOUDSPEAKERS
HLE-2 Drivers HLE-2 Driver mounted to HLE/MLE-30 Horn HLE-2 Driver mounted to HLE/MLE-32 Horn

30 AND 60-WATT LOUDSPEAKERS

HLE and MLE Series. These UL and CSA (HLE Models only) listed loudspeakers are specified for high-efficiency transmission of voice and/or electronic signals within explosive or combustible atmospheres and environments. Drivers and projector horns may be configured to comply with specific environment classification groups within Class 1 and 2 ratings. HLE Series drivers are 60 watts. MLE Series are 30 watts. Both are offered with an internally mounted line transformer (-T) or without. To meet UL Standards for loudspeakers in distributed applications, models with factory-mounted transformer (-T) must be specifid. Projector horn Model HLE/MLE-30 is a reflex-type sound projector of molded plastic with wide-angle dispersion. Model HLE/MLE-32 is an all-metal circular reflex horn with directional sound distribution pattern. Drivers and projector horns are ordered and shipped separately. For performance accuracy, specifications are listed for assembled configurations. All models are equipped with "k" conduit access and adjustable mounting bracket. Horn Model HLE/MLE-30 with a mounted driver measures 14" W x 6" H x -17-1/2" D. Model HlE/MLE-32 horn with a mounted driver is 16'&" Dia. x 21 'k" D.

MODEL POWER RATING FREQ. RESP. SOUND LEVEL* SENSITIVITY**
DISPERSION
IMPEDANCE INTERNAL
DRIVER HORN
HLE-2(T) HLE/MLE-30 60Watts

Cont.

250Hz-

12 kHz

109dB -18 dBm 120° x 60° 16 Ohms 60 Watt

(Model T-18)

HLE-3(T) HLE/MLE-30 108dB
MLE-2(T) HLE/MLE-30 30Watts

Cont.

300 Hz -

14 kHz

107dB -21 dBm 120° x 60° 8 Ohms 30Watt

(Model T-20)

MLE-3(T) HLE/MLE-30 106 dB
HLE-2(T) HLE/MLE-32 60 Watts

Cont.

190 Hz

12 kHz

112 dB -16 dBm 95 ° 16 Ohms 60 Watt

(Model T-18)

:HLE-3(T) HLE/MLE-32 111 dB
MLE-2(7) HLE/MLE-32 30Watts

Cont.

200 Hz

10 kHz

110 dB -20 dBm 95° 8 Ohms 30 Watt

(Model T-20)

MLE-3(T) HLE/MLE-32 110 dB

*Measured at 1 watt. 1 meter.
**As microphone: re 10 dynes/cm2
***T versions only

UNDERWRITERS' LABORATORY LISTINGS

MODELS CLASS/GROUP FOR ATMOSPHERE CONTAINING:
HLE-2

MLE-2

Class 1 / Group C & plus:

Class 2 / Group E, F, & G

Gas Atmospheres (Including Ethyl, Ether, Gasoline Naptha, Alcohols, Butane, Propane), plus Dust Atmospheres ( Metals, Carbon, Grain)
HLE-3

MLE-3

Class 1 / Group B,C, &D Gas Atmospheres (Including Ethyl, Ether, Gasoline Naptha, Alcohols, Butane, Propane), plus Hydrogen, Gas and Vapour, ( Manufactured Gas)

Request for Information / Request a Catalog from Atlas/Soundolier
 
 
 
To request more information from Atlas/Soundolier, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996–2008 AECinfo.com