architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Atlas/Soundolier   Atlas Soundolier Communication Products  

Atlas Soundolier Communication Products - Page 27

   

Atlas Soundolier Communication Products

ROUND RECESSED BAFFLES FOR 4", 8", AND 12" LOUDSPEAKERS
 
TM222W T610-8W T710-4BT
T720-4BT T720-8A T730-8B

T740-4

CONTOURED ALUMINUM BAFFLES

M222 Series. Popular baffle is available in standard screw-mount or torsion-spring (T) versions. One-piece aluminum construction. Finished in satin aluminum ortextured white (W) as noted.

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
M222(W) 8" (203mm) 12 ¾" (324mm) 3/8" (10mm) (EZ)95-8 Series, T95-8 Series,(EZ)96-8 Series*, 199-8,Q408, CS95-8(NS) 75-8(E1)(E2),76-8(E1)(E2),P77-8, P78-8,81-8R(S), EQ81*
TM222W 8." (203mm) 12 ¾" (324mm) 3/8" (10mm) T95-8(NS)(NK),BMT95-8(-7), EZ95-8 T75-8(E1)(E2),81-8S

• EQ81 tile bridge works only with the 96-8 Series enclosures.

BEVELED CONCEALED MOUNTING BAFFLE

T610-8W. Architecturally pleasing design features torsion-spring mounting and concealed loudspeaker studs to provide for a uniquely clean appearance. Two-piece CRS baffle features a beveled edge trim ring with rear-mounted grille. Assembly is finished in textured white epoxy.

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
T610-8W 8" (203mm) 12 7/8" (327mm) 5/16" (8mm) T95-8 Series,BMT95-8(-7),EZ95-8 T75-8(E1)(E2),81-8S

PERFORATED CONCEALED MOUNTING BAFFLES

T710 Series. All-perforated screen grille assumes an inconspicuous appearance in recessed ceiling applications. Features torsion-spring mounting and concealed loudspeaker mounting studs. Manufactured from CRS and finished in textured white epoxy.

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
T710-4* 4" (102mm) 7 3/8" (187mm) 3/32" (2mm) E410 Series, EZE410 PR411
T710-8 8" (203mm) 12 7/8" (327mm) 3/32" (10mm) T95-8 Series,BMT95-8(-7), EZ95-8 T75-8(E1)(E2),81-8S

SCULPTURED CONCEALED MOUNTING BAFFLES

T720-4 Series. High-quality grille with contoured trim ring and fine perforation pattern coordinates with lighting fixture trims to provide a clean and contemporary appearance for 4" loudspeakers. Models have provisions to accommodate ceiling thicknesses up to 2" deep. All models also feature a flush perforated center section, torsion springs, and concealed loudspeaker mounting studs. Welded CRS assemblies are finished in textured white. (Model T720-4BTwas formerly Engr. Special M4551-4BT.)

T720-8A. Attractive baffle mounts 8" loudspeakers and offers all of the features of the T720-4 Series described above with the addition of two separate deep-ceiling, torsion-spring brackets to accommodate varying ceiling depths up to 2".

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
T720-4* 4" (102mm) 7 3/8" (187mm) 9/16" (14mm) (EZ)E410 Series PR411
T720-4BT* 8½" (216mm) (EZ)E410 SeriesBMT95-4(-7)
T720-8A 8" (203mm) 12" (305mm) 9/16" (14mm) T95-8 Series,EZ95-8, BMT95-8(-7) T75-8(E1)(E2),
81-8S

CONCEALED MOUNTING BAFFLES WITH REGRESSED STEPS

T730 Series. Superb design features interior regressed steps to simulate recessed lighting fixtures. Torsion spring installation and concealed loudspeaker mounting studs eliminate all visible hardware. Welded CRS construction prevents vibration. Two-tone finish is matte white on the outer trim and choice of black (B) or charcoal grey (G) on the interior. T730-4 Series is 1 1/16" (27mm) deep and theT730-8 Series is 1 5/16" (33mm) deep.

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
T730-4B(4G)* 4" (102mm) 7 3/8" (187mm) 1/8" (3mm) E49(NK), EZE49 PR412
T730-8B(8G) 8" (203mm) 11 "(279mm) 1/8" (3mm) T195-8(NK), EZ195-8 T175-8

SLIMLINE BAFFLE WITH MINIMAL PROJECTION

T740-4. Ultra thin baffle extends a mere 'he" from the ceiling and features concealed loudspeaker mounting studs and perforated grille to provide a uniquely clean and flush appearance. Welded CRS construction. Finished in textured white epoxy.

MODEL SPEAKER DIAMETER PROJECTS ENCLOSURE or MTG. RING
T740-4* 4" (102mm) 7-1/4" (184mm) 1/16" (2mm) E410 Series,EZE410 PR411

*Model now includes provisions to accomodate ceiling thicknesses up to 2" deep



Request for Information / Request a Catalog from Atlas/Soundolier
 
 
 
To request more information from Atlas/Soundolier, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.