Construction (Barrier International Corp.)

BARRIER AQUA
Aqua Water Base Air Dry is a modified aqueous thermoplastic acrylic polymer system, specifically designed for use on concrete, asphalt, wood, metal (ferrous and non-ferrous), cementitious and many other surfaces. Its rugged durability makes Aqua ideal for use on surfaces subjected to heavy abrasion: driveways, roads, parking decks, even runways! Deterioration of asphalt and concrete due to spillage of grease, motor oil , various acids, gasoline, and jet fuel can be prevented with the application of Aqua.

Aqua exhibits excellent stability with reactive pigments necessary for corrosive resistance when used over cold rolled steel or other demanding substrates.

Aqua contains no hydrocarbon carrying agent - it does not contribute to air pollution!

barr03a.JPG (7817 bytes)

BARRIER clear protective coating prevents water penetration.

Aqua is an excellent curing agent on wet cement: prolonging the drying process to achieve a crack free surface, while preventing rapid dehydration and maintaining a durable shield against moisture penetration.

The surface to be sealed must be thoroughly clean. However, it does not need to be dry. Aqua may be applied over a damp surface. It should be applied with a brush, roller, or airless-spray equipment. BARRIER Aqua will cover 300-400 sq. ft./gal. depending on the porosity of the surface.

Additional information available on request.

PROPERTIES: The following represents a property evaluation list of the performance characteristics of the Aqua coating system. Additional data is available upon request.
Viscosity #4 Ford Cup @ 25°C (77°F)	30-40 sec.
Coating solids (by weight)	29.5%
Weight/gal. lbs	8.44
Dry time @ .003 wet (set to touch) 3 mils	approximately 15 minutes
Dry time @ .003 wet (dry hard) 3 mils	less than 1 hour
Dry through @ .003 wet	96 hours
2nd coat application (if needed)	within 1 hour
Ambering upon exposure	none
Flammability	non-flammable
Resistance to Aliphatic and Aromatic hydrocarbons	10
Salt spray resistance 168 hrs./95°F/100°RH 5% sol'n	10
Block and print resistance	10
Flexibility (1/4-1/8" mandril)	no cracking
Specular Gloss 60°	80-85
Water resistance	10
Motor oil resistance	10
Gasoline resistance	10
Adhesion to substrate	10
Resistance to atmospheric contaminants	10
Slip and skid resistance (dry or wet)	10
Taber abrasion 1,000 GM head load cs 17 wheels/MGS WGT loss/ 1,000 cycles	96.9
Taber abrasion 500 GM head load cs 17 wheels MGS WGT loss/ 1,000 cycles	36.6
Application temperature	50°F min.
Clean up vehicle water Weathermeter U.V. resistance 500 hrs	10
KEY TO RATING 0-10:	0 : complete failure 10 : excellent

Quality and Superiority in the Coating Industry
ENVIRONMENTALLY FRIENDLY!

Barrier Aqua