Specifications -

Certifications - 34H/35H Series - ANSI A156.13, Series 1000, Grade 1 Operational, Grade 2 Security. 36H/37H Series - ANSI A156.13, Series 1000, Grade 1 Operational. Grade 1 Security (keyed deadbolt and latchbolt functions only). The 30H Series is listed by Underwriter's Laboratories for use on 3 hour, A label doors. GYJT Builders Hardware - single point locks or latches. 1E7J4 cylinder (used with 36H/37H) conforms to UL437 standard for safety key locks, referencing high security cylinders. For UL: GYQS electrically controlled single point locks or latches. For New York: Approved by the City of New York Board of Standards and Appeals under calendar number 49-88-SM.

Case - Heavy wrought steel, 5 7/8" (149.35mm) high x 4 1/4" (107.95mm) deep x 1" (25.4mm) wide. Steel parts zinc dichromate plated for corrosion resistance.

Faceplate - Brass or bronze, 1 1/4" (31.75mm) x 8" (203.2mm) x 7/32" (5.56mm). Adjustable from flat to beveled 1/8" (3.18mm) in 2" (50.8mm).

Backset - 2 3/4" (69.85mm)

Latchbolt - Solid brass, 3/4" (19.05mm) throw. Satin chrome finish.

Deadbolt - Stainless steel, 1" (25.4mm) throw.

Auxiliary Deadbolt - Stainless steel.

Strike - Brass, bronze or stainless steel (4 7/8" (123.95mm) x 1 1/4" (31.75mm) x 3/32" (2.38mm) (ANSI A115.1). Correct strike with box and screws supplied with unit.

Door Thickness - For door 1 3/4" (44.45mm) thick. Door thickness must be specified.

Mounting - Self-aligning knob and lever handle trim mounting. Lever handle attached with hardened set screw on inside handle.