Fabric Specifications Consists of 100% Polyolefin yearn with a Latex/Acrylic backing (total weight: 12.02 oz. per linear ft.) Velcro Compatible Completely washable and unaffected by most chemicals, acids, alkalis, salts and cleaning agents (including household bleach). Will not support the growth of mildew or bacteria. Offers the aesthetics of a fabric with the durability of heavy-duty vinyl.

Fabric Cork-Plate

Fabric Covered Cork-tough, durable fabric laminated to 1/4" natural cork on 1/4" hardboard. Cork-Plate standard height: 4'. Standard lengths: .3', 4', 5', 6', 10', 12' or 16'. Smaller heights and intermediate lengths are available. Approximate shipping weight: 3.0 lbs. per square foot.

Fabric Add-Cork

Fabric Covered Cork-tough, durable fabric laminated to 1/8" natural cork on 3/8" insulated board. Add-Cork standard height: 4'. Standard lengths: 3', 4', 5', 6', 10' or 12'. Small heights and intermediate heights are available. Maximum length in one piece is 12'. Approximate shipping weight: 2.0 lbs. per square foot.

Fab-Tak

Fab-Tak-fabric laminated to 1/2" treated insulated board with excellent tack holding qualities. Fab-Tak Tackboard is available with cut edges or with fabric wrapped edges. Fab-Tak standard height: 4'. Standard lengths: 3', 4', 5', 6', 10' or 12'. Small heights and intermediate lengths are available. Maximum length in one piece is 12'. Approximate shipping weight: 2.0 lbs. per square foot.

Natural Cork Bulletin Board Material

Natural Add-Cork-No.20-200

Natural Cork - 1/8" fine grain pure natural cork on 3/8" insulated board. The resilient natural cork remains soft and pliable. Recovers quickly from tack holes. 1.5 lbs. per sq. ft.

Natural Corkplate-No.20-700

Natural Cork-1/4" fine grain pure natural cork on 1/4" hardboard. The resilient natural cork remains soft and pliable. Recovers quickly from tack holes. 2.5 lbs. per sq. ft.

1/2" Porcelain Steel Marker Board No. 120

The writing surface on the Marker System Board is a glass-hard, smooth, low-gloss porcelain on steel for use with colorful marker pens. The pens write on dry, while erasing easily and dust-free with a dry cloth or felt eraser. A precisely balanced porcelain enamel ground coat is applied to both sides of steel for a uniform, fused surface. The first furnace fuses ground coat enamel into heat-softened 28 gauge steel* at approximately 1450°F. The ColorFusion ceramic top coat is applied providing the desired color fade resistant characteristics. The second firing furnace fuses a face coat enamel to the ground coat enamel. The lifetime vitrified porcelain is bonded with waterproof rein glue to Highgrade MDF (Medium Density Fiber Board) core with aluminum back. The Marker System panel thickness is 1/2". Standard height: 4' (Optional 5' height up to 16' lengths). Standard lengths: 3', 4', 5', 6', 8', 10', 12', or 16'. Smaller heights and intermediate lengths are available. 4.5 lbs. per sq. ft. *24 gauge steel is optional.

Call: (800) 749-2258 . (254) 697-4953
Fax: (800) 529-7577 . (254) 697-2791