| Bike-StandardTM
|
Moderate Security
At Minimum Cost
SECURES FRAME & ONE WHEEL |
 |
the complete line of Secure Bicycle and Motorcycle
Storage Systems
DESCRIPTION
Where a more massive appearance and greater structural
strength and rigidity are desired, consider specifying the Heavy Duty model.
FEATURES
Although the 3" x 3/8" steel flat bar headers and
side rails of the Regular model are rigid and massive enough for most sites, the
doublethick 3" x 3/4" steel flat bar used in the Heavy Duty models may be
preferred for special cases. Or, choose an even thicker, but proportionately lighter
construction with 3" x 1" steel tubing. In either case, the alternating round
and square rod pickets are 3/4" dia. and 3/4" square solid steel, respectively.
| Bike HOOPTM |
High Security
With Design Appeal
SECURES FRAME & BOTH WHEELS |
|
DESCRIPTION
New for the 90'ies, Bike-Hoop® bike rack, with
its circular aspect, offers the designer an interesting new form for exterior site
applications.
FEATURES
Fabricated of 2" nominal, Schedule 40 steel pipe formed to
36" O.C. diameter, Bike-Hoop racks feature a pair of 6' x 3/16" dia. vinyl
covered, spiralled coiler cables. These are attached under the top of the hoop to which
the frame and one wheel of a bike may be secured on either / or both sides.
ORDERING
INFORMATION * |
| MODEL NO. |
RACK LENGTH |
NO. OF BIKES |
INSTALLATION |
| BH - 2S |
3' - 0" |
2 |
surface |
| BH - 2B |
3' - 0" |
2 |
below grade |
|
|
|
BIKE SECURITY RACKS COMPANY
R.P. #1, Box 476B, RUMNEY, NH. 03266
PHONE: 1-800-545-2757; FAX: 1-603-786-9652 |
|
