Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Bird Barrier America  Architectural Bird Control Systems  

BirdpointTM

 

 

BIRDPOINT™
Finally, the Ultimate Ledge Protector

For years architects, building owners and bird control professionals have been forced to use sharp, unsightly and hard-to-Install spike products, often with negative results. BirdPoint™ proves all naysayers wrong. This spike is low visibility, more economical, and most importantly, not sharp. And, because BirdPoint™'s base is not metal, rust will not build up between it and your building. Bird Barrier's BirdPoint™ can be used to keep pigeons, gulls and other large birds off of signs, ledges, parapets, beams, pipes, chimneys, cut-outs, equipment, lights and much more.

birdb03a.JPG (25624 bytes)
Invisible from the ground, BirdPoint™ provides the most robust protection against pigeons on signs, ledges and other hard to protect areas.  Notice space between rows of BirdPoint™ and the back wall.

A Pigeon's Ultimate Foe

BirdPoint
is created specifically for pigeons and larger birds. The rods are spaced precisely to make it impossible for these pest birds to land and roost. BirdPoint is the most robust ledge protection system available, deterring even the most determined birds from reclaiming your building as their roost.

Long-Term Solution
StealthNet™ comes with an unconditional five-year guarantee against ultraviolet breakdown. It has been known to last more than ten years when installed according to manufacturer's specifications.

BIRDPOINT™ 1
birdb03b.JPG (5551 bytes)
For ledges less than 2" wide
BIRDPOINT™ 2
birdb03c.JPG (15518 bytes)
For ledges 2" to 4" wide.
BIRDPOINT™ 3
birdb03d.JPG (12843 bytes)
For ledges 5" to 7" wide.
BIRDPOINT™ 4
birdb03e.JPG (13158 bytes)
Notice gap against the wall.
birdb03f.JPG (5910 bytes)
20" ledge
BirdPoint™ tips can be placed apart.  Use this example when combining BirdPoint™ 1,2 and 3 to protect various ledge widths.

Easy to Install
BirdPoint™'s plastic base can be glued directly to the mounting surface, or screwed down through the holes provided. And, at a corner or ledge-end, simply snap the BirdPoint™ at the perforated point (every inch and a half), and keep on going; no hack saw, shears or bloody hands here.

birdb03g.JPG (7290 bytes)
BirdPoint
2 protects narrower ledges effectively. Notice wide spacing of blunt rods.

Materials
BirdPoint
's rods are made of the finest stainless steel available, and the base of ultra violet stabilized acrylonitrile polystyrene. BirdPoint comes with an unconditional five year guarantee.

Humane
While BirdPoint
's spiked competitors claim to be humane, BirdPoint™ truly is. Because the spikes are not sharpened, they cannot inflict injury on birds, and are far less likely to injure an unsuspecting child or worker who unknowingly places his or her hand on the product.

Free Protection
Because of BirdPoint
's unique configuration, the tips of the rods can be placed up to two and a half inches from the wall at the back of a ledge, and multiple rows of BirdPoint can be spaced two inches apart, from tip to tip. Free protection that other spiked products cannot promise.

Less Debris
All spike products are inclined to retain debris occasionally, but BirdPoint
with its unsharpened rods and large spacing between rods, literally thumbs its nose at debris.

How to Specify BirdPoint™
Simply measure the length and width of all ledges or landing platforms. Identify the material and decide whether  to glue or screw.
And of course, call Bird Barrier for any assistance toll-free at 800-503-5444.

INSTALLATION TIP
birdb03h.JPG (11322 bytes)
Wood, Sheet Metal  Self tapping screws, or nails, in 3-4 holes per foot.
birdb03i.JPG (11108 bytes)
Concrete, Steel or Stone  Bird Barrier Bond every second section (four dabs of Bond per foot).

Request for Information / Request a Catalog from Bird Barrier America
 
 
 
To request more information from Bird Barrier America, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996–2008 AECinfo.com