Toilet and Bath Accessories (Bobrick Washroom Equipment)

Lavatory Mounted ( For anitbacterial, liquid and lotion soaps)

B-822

B-8225

B-8221

TOP-FILLING SOAP DISPENSERS

For ease of maintenance and labor savings.
Vandal-resistant locking cover and free-turning spout.
Corrosion-resistant.
Valve meets barrier-free standards: operable with less than 5 pounds of force (22.2 N) when container is completely filled.
Bright polished spout, cover and escutcheon.
High-impact-resistant ABS body and shank.
Shatter-resistant polyethylene container.
Patented design.

FOR DISPENSING ANITBACTERIAL SOAPS, IODINE/ALCOHOL-BASED SOLUTIONS, LIQUID AND LOTION SOAPS, AND SYNTHETIC DETERGENTS
Model Number
Stainless Steel	Brass Finish	Capacity	Spout Length	Maximum Mounting Thickness
B-822	B-8225*	34 fl oz (1.0 L)	4" (100mm)	4" (100mm)
B-8221	N/A	20 fl oz (0.6 L)	4" (100mm)	1" (25mm)
B-8226	B-82265*	34 fl oz (1.0 L)	6" (150mm)	4" (100mm)
B-82216	N/A	20 fl oz (0.6 L)	6" (150mm)	1" (25mm)

*Do not use antibacterial soaps or iodine/alcohol-based solutions in brass finish units.

Under-Counter Reservoir System ( Not for Antibacterial Soaps)

DESIGNER'S NOTE

Mount through 1" (25mm) diameter hole in lavatory or countertop.
Diameter of escutcheon: 2 1/16" (50mm).
Maximum height from base of body to bottom of container: 14 5/8" (370mm) for B-822, B-8225, B-8226, B-82265; 8 1/4" (210mm) for B-8221, B-82216. Allow clearance below basin for 3 1/2" (90 mm) diameter container.
Mount so end of spout extends over inner edge of bowl.
Specify, "Lavatory-mounted soap dispenser shall operate with less than 5 pounds of force (22.2 N) when completely filled."

BARRIER-FREE WASHROOM GUIDELINES

SOAP DISPENSERS. Push buttons and pistons should be operable with one hand and without tight grasping, pinching, or twisting of the wrist. Activation of soap valves should not require more than 5 pounds of force (22.2 N) when unit is completely filled.

TOP-FILLING SOAP DISPENSERS
WITH UNDER-THE-COUNTER SOAP RESERVOIR

Eliminates frequent refilling of single soap dispensers, reducing maintenance time and labor costs.
Large-capacity under-the-counter reservoir feeds multiple lavatory-mounted dispensers; check and fill from any dispenser.
Ideal for large, heavy-traffic industrial and public washrooms.
Features patented soap dispensers as described for B-822 Series above) withy 36" (915mm) long supply tube which can be cut-to-fit in the field.
Equipped with 10" (255 mm) long, translucent plastic elbow for visible soap level and 33" (840mm) flexible connector hose which can be cut-to-fit in the field.
Specify one unit for each lavatory; each providing 0.9-gal. (3.3-L) soap capacity, plus capacity of pipe connections.

Model Number	Spout Length
B-922	4" (100mm)
B-9226	6" (150mm)

End caps available from Bobrick as optional accessory; order Part No. 922-45 for 3" standard pipe size. Or purchase locally from plumbing supply wholesaler. PVC pipe connections not furnished. Purchase locally from plumbing supply wholesaler.

Recessed

			B-4063 CONTURA SERIES SOAP DISPENSER Corrosion-resistant valve dispenses E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents. Front of dispenser drawn, 20-gauge 91.0mm), one-piece, satin-finish stainless steel with covered, plastic soap vessel attached to back. Capacity: 50 fl oz (1.5 L). Pulls out for filling and maintenance. Concealed locking device. Vandal-resistant. Unbreakable refill window. Wall to push button, 1⁵/₈" (40mm). Rough Wall Opening: 5⁷/₈" W, 5½" H, 4" min. depth (150 x 140 x 102mm). Patented.
			B-4112-79 RETROFIT ALL-PURPOSE VALVE Available for Models B-4063 and B-4112, field-replaceable soap valve dispenses E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents.
	Soap vessels swings out for filling.		B-306 TRIMLINE SERIES SOAP DISPENSER Satin-finish stainless steel. Door has 90° return, conceals flange. Enclosed plastic soap vessel on back of door swings open for easy filling. Full-length hinge and tumbler lock secures door to cabinet. Capacity: 45 fl oz (1.3 L). Patented SureFlo™ corrosion-resistant valve dispenses liquid and lotion soaps, and synthetic detergents. Unbreakable refill window. Rough Wall Opening: 8³/₈" W, 4³/₈" H, 3⁷/₈8" min. depth (215 x 110 x 100mm)
			2111-79 SUREFLO™ RETROFIT VALVE For Models B-11, B-12, B-111, B-112, B-201, B-2014, B-2111, B-202, B-2024, B-306, B-3067, B-310, B-320 and B-330 Series Combination Units. Valve operates with less than 5 lb of force (22.2 N). Patented.
			B-330 CLASSIC SERIES MIRRORED MULTIPURPOSE UNIT Mirror, paper towel dispenser, utility shelf, recessed shelf, and soap dispenser. Satin-finish stainless steel. Seamless beveled flange. Patented SureFlo™ corrosion-resistant valve dispenses liquid and lotion soaps, and synthetic detergents. Capacity: 80 fl oz (2.4 L). Dispenses 600 C-fold or 800 multifold towels. Mirror on locked door. Rough Wall Opening: 16" W, 29¼" H, 4" min. depth (405 x 745 x 102mm). Av. Mtg. Ht.: 74" (1880mm) to to of unit.
			B-3309 Similar to B-330, but with stainless steel skirt for surface mounting.

Surface Mounted
		B-4112 CONTURA SERIES SOAP DISPENSER Corrosion-resistant valve dispenses E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents. Container is satin-finish stainless steel. Capacity: 40 fl oz (1.2 L). Unbreakable refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal-resistant. measures 7" W, 6¹/₈" H (180 x 155mm); wall to push button, 3⁵/₁₆" (85mm). Patented.
B-2112		B-2112 CLASSIC SERIES SOAP DISPENSER Horizontal tank is satin finish stainless steel. Corrosion-resistant valve dispenses liquid and lotion soaps, and synthetic detergents. Container is satin-finish stainless steel. Capacity: 40 fl oz (1.2 L). Unbreakable refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal-resistant. Measures 8¹/₈" W, 4¾" H (206 x 121mm); wall to push button, 3½" (90mm). Patented.
NEW B-2111		B-2111 Similar to B-2112, but with vertical tank.
		B-2014 SOAPERSHELF^® COMBINATION UNIT Soap vessel and shelf are satin-finish stainless steel; locks to wall plate. Exclusive Bobrick design permits removal of soap vessel for cleaning. Capacity: 80 fl oz (2.4 L). Patented SureFlo™ corrosion-resistant valve dispenses liquid and lotion soaps, and synthetic detergents. Unbreakable refill window. 17½" W, 3¹/₈" H, 5" D (445 x 80 x 125mm); wall to push button, 7¹/₁₆" (180mm).
DESIGNER'S NOTES All surface-mounted soap dispensers require 4" (100mm) minimum clearance above unit for filling; B-014 SoaperShelf^® requires 5¼" (13mm) All Bobrick soap valves meet barrier-free standards; operable with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) when soap container is completely filled.

BARRIER-FREE WASHROOM GUIDELINES SOAP DISPENSERS. Push buttons and pistons should be operable with one hand and without tight grasping, pinching, or twisting of the wrist. Activation of soap valves should not require more than 5 pounds of force (22.2 N) when unit is completely filled. If wall-mounted units are placed over lavatories or countertops, then their push buttons should be located 44" (1120mm) maximum above the finish floor).

B-2112

B-40

B-5050

B-40 , B-42		B-40 CLASSIC SERIES SOAP DISPENSER Two-tone styling in black and grey. Corrosion-resistant, self-cleaning valve dispenses liquid and lotion soaps, and synthetic detergents. Vandal-resistant lid has unique keyless locking device. Lid pivots up after lock is disengaged for easy top filling. large-capacity, translucent container provides visible soap level. Capacity: 40 fl oz (1.2 L). Concealed wall fastening. Unit is removable from wall for cleaning. 5¹³/₁₆" W, 6⁷/₈" H (150 x 175mm); wall to push button, 3³/₁₆" (80mm). Patented.
B-40 , B-42		B-42 Same as B-40, except with all-black styling. Patented.
		CLASSIC SERIES LIQUIDMATE^® SOAP DISPENSERS Corrosion-resistant valve dispenses thin, free-flowing liquid soaps and synthetic detergents. Translucent polyethylene container provides visible soap level. 24-fl oz (0.7-L) capacity. 4" W, 7⁵/₈" H (100 x 195mm).
		B-155 Bright polished, chrome-plated ABS mounting bracket. Patented.
		B-156 Beige ABS mounting bracket. Patented.
		B-5050 MATRIX SERIES SOAP DISPENSER Impact-resistant polymer; grey color. Corrosion-resistant valve dispenses liquid and lotion soaps, and synthetic detergents. Valve removable for easy maintenance. Lid has concealed locking device. Concealed wall/mirror mounting. large-capacity container: 50 fl oz (1.5 L). 6" W, 8¹/₈" H (150 x 205mm); wall to push button, 4" (100mm). Patents pending.
		5090-30 RETROFIT ANTIBACTERIAL VALVE Available for Model B-5050, field-replaceable soap valve dispenses E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents.
		B-170 POWDERMATE^® SOAP DISPENSER Valve dispenses free-flowing powdered soap from coarse granules to fine powders. Exclusive moisture-seal valve prevents soaps from clogging. Polyethylene container with visible soap level. Capacity: 34 fl oz (1.0L). Bright polished, chrome-plated ABS mounting bracket 4" W, 10⁵/₈" H 9100 x 270mm). Patented.
		B-132 POWDERED SOAP DISPENSER Container is satin-finish stainless steel. Capacity: 32 fl oz (0.9 L). Valve with stainless steel lever dispenses any free-flowing powdered soap. Exclusive design permits custodian to adjust per stroke output. Agitator spring prevents soap build-up. Top opens with special key provided. Concealed wall fastening. 4¾" W, 8¹/₈" H 9120 x 205mm); wall to lever, 3¾" (95mm)
		B-60 SOAP DISPENSER Ideal for high-volume applications, such as health and sports club showers. Corrosion-resistant, self-cleaning valve dispenses liquid and lotion soaps, and synthetic detergents. Translucent high-impact plastic container provides visible soap level and has oversize opening for quick top filling. Extra-large capacity: 1.5 gal. (5.7 L).
		B-5090 MATRIX SERIES ANTI-BACTERIAL SOAP DISPENSER Impact resistant polymer; grey color. Corrosion-resistant valve dispenses E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents. Valve removable for easy maintenance. Lid has concealed locking device. concealed wall/mirror fastening. Large-capacity container: 50 fl oz (1.5 L). 6" W, 8¹/₈" H 9150 x 205mm); wall to push button, 4" (100mm). Patents pending.
		B-119 FOOT-OPERATED ANTIBACTERIAL SOAP DISPENSER Corrosion-resistant valve dispense E4-rated antibacterial soaps, iodine/alcohol-based solutions, as well as liquid and lotion soaps, and synthetic detergents. Stainless steel hood and shatter-resistant plastic container measure 3½" W, 6" H (90 x 155mm). Capacity: 18 fl oz (0.5 L). Spout projects 10½" (265mm) from wall. Molded rubber foot-pump has nonslip base. Maximum mounting height: 60" (1525mm) to top of dispenser.
Important Notes ( Not for Antibacterial Soaps) Models B-40, B-42, B-60, B-2014, B-2111, B-2112, B-306, B-5050, B-8225, B-82265, and B-922 Series are equipped with soap valves designed to dispense liquid and lotion soaps, and synthetic detergents. Models B-155 and B-156, liquid soaps and synthetic detergents only. WARNING: Do not use E4-rated antibacterial soaps (active ingredient PCM or Tricclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions. Models B-119, B-4063, B-4112, B-5090, B-822, B-8221, B-82216, and B-8226 are equipped with soap valves designed to dispense E4-rated antibacterial soaps (active ingredient PCMX or Griclosan), iodine-based surgical soaps, alcohol-based antiseptic solutions, as well as liquid and lotion soaps, and synthetic detergents.

USA & Canada QuickShip model. USA QuickShip model.

Soap Dispensers - Pages 15, 16 & 17