| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|
|
| |
|
| |
  Bobrick Washroom Equipment Toilet and Bath Accessories Mirrors - Pages 18 & 19
Angle Frame
B-290 SERIES |
| STANDARD STOCK
SIZES B-290 SERIES MIRROR |
| |
Model No. |
Width |
Height |
|
| |
B-290 1624 |
16" |
24" |
(41 x 61cm) |
 |
B-290 1824 |
18" |
24" |
(46 x 61cm) |
| |
B-290 1830 |
18" |
30" |
(46 x 76cm) |
 |
B-290 1836 |
18" |
36" |
(46 x 91cm) |
| |
B-290 2060 |
20" |
60" |
(51 x 152cm) |
| |
B-290 2430 |
24" |
30" |
(61 x 76cm) |
| |
B-290 2436 |
24: |
36" |
(61 x 91cm) |
| |
B-290 2448 |
24" |
48" |
(61 x 122cm) |
| |
B-290 2460 |
24" |
60" |
(61 x 152cm) |
| |
B-290 2472 |
24" |
72' |
(61 X 183cm) |
| |
B-290 3636 |
36" |
36" |
(91 x 91cm) |
| |
B-290 4836 |
48" |
36" |
(122 x 91cm) |
| |
B-290 6036 |
60" |
36" |
(152 x 91cm) |
| |
B-290 7236 |
72" |
36" |
(183 x 91cm) |
|
STANDARD STOCK
SIZES
B-292 SERIES MIRROR/SHELF |
| |
Model No. |
Width |
Height |
|
| |
B-292 1824 |
18" |
24" |
(46 x 61cm) |
| |
B-292 1830 |
18" |
30" |
(46 x 76cm) |
| |
B-292 1836 |
18" |
36" |
(46 x 91cm) |
| |
B-292 2436 |
24" |
36" |
(61 x 91cm) |
Special-order custom size B-290 and B-292 series mirrors. Maximum
size of one-piece mirror: 144" x 72" (366 x 183cm). Maximum frame size
available: 186" x 72" (472 x 183cm) with two pieces of glass in one-piece frame
furnished with l-section molding with polished stainless steel exposed finish covering
seam where two pieces of glass butt together. Shelves longer than 120" (305cm) will
be furnished as two pieces butted together. To specify special sizes, use Series Number
followed by width and height in inches. For example: B-290 70 x 30 (178 x 76cm) or B-292
132 x 48 (335 x 122cm) |
DESIGNER'S
NOTES
To specify mirrors, use Series Number desired followed
by width and height in inches. Width dimension must always be stated first following
Series Number.
B-165, B-166, B-290, B-292, B-293, and B-294 Series
mirrors must be installed with width and height dimensions as ordered. Mirror back and
wall hanger cannot be installed side ways to reverse width and height dimensions. |
BARRIER-FREE
WASHROOM GUIDELINES
MIRRORS: Bottom edge of reflective surface should be
mounted no higher than 40" (1015mm) above the finish floor. A single full-length
mirror is recommended in each washroom because it is universally usable.
IMPORTANT NOTE
All Bobrick framed mirrors are manufactured to overall
dimensions, as shown in all mirror tables on pages 18 and 19. Overall height of
mirror/shelf models includes shelf. |
| SPECIAL-ORDER REFLECTIVE
SURFACES |
| Polished Stainless Steel,
Tempered and Laminated Glass Mirrors resist breakage and provide a measure of safety from
broken glass, but differ in color and reflective quality from standard glass mirrors. |
Mirror
Series |
Polish Stainless Steel
Add Suffix 6 to Mirror Series
number. Example: B-2906 |
Tempered Glass
Add Suffix 8 to Mirror Series
number. Example: B-2908 |
Laminated Glass
Add Suffix 9 to Mirror Series
number. Example: B-2909 |
| B-290 |
72" x 24" (183 x 61cm)
max. |
120" x 48" (305 x
122cm) max. |
96" x 48" (244 x 122cm)
max. |
| B-292 |
72" x 24" (183 x 61cm)
max. |
120" x 48" (305 x
122cm) max. |
96" x 48" (244 x 122cm)
max. |
| B-165 |
72" x 24" (183 x 61cm)
max. |
72" x 48" (183 x 122cm)
max. |
72" x 48" (183 x 122cm)
max. |
| B-166 |
24" x 48" (61 x 122cm)
max. |
24" x 48" (61 x 122cm)
max. |
24" x 48" (61 x 122cm)
max. |
|
Angle
Frame/Shelf
B-292 SERIES |
| B-290 SERIES FRAMED MIRRORS One-piece roll formed frame is ¾" x ¾" (19 x 19mm), type-304
stainless steel angle with satin finish. Special bevel design hugs mirror. Corners are
heliarc welded, ground and polished smooth. No. 1 quality, ¼" (6mm) glass mirror
electrolytically copper-plated; guaranteed against silver spoilage for 15 years. Mirror
edges protected with plastic filler strips to prevent chipping; back is protected by 3/16" (5mm)
thick, water-resistant, polyethylene padding. Galvanized steel back attached to frame with
concealed screws. Secured to concealed wall hangar (shown below) with two theft-resistant
locking screws. |
B-292 SERIES MIRROR/SHELF COMBINATION Theft-resistant angle-frame mirror furnished with one-piece, type-304
satin-finish stainless steel shelf; projects 5" (127mm) and has ¾" (19mm)
return edges on front and sides. Front return edge hemmed for maximum rigidity and safety.
Corners are heliarc welded, ground and polished smooth. Concealed 16-gauge (1.6mm)
stainless steel brackets attach shelf to mirror frame. |
 |
| CONCEALED WALL HANGER FOR
THEFT-RESISTANT MOUNTING Simplifies installation. Mirror is held flush to wall by
integral brackets at to and by two locking devices on bottom corners of mirror back.
Constructed of galvanized steel. Furnished with B-290 Series Framed Mirrors and B-292
Series Mirror/Shelf combinations. Note: Provide minimum ¾" (19mm) clearance at top
of mirror for mounting on wall hanger, minimum 1" (25mm) clearance at bottom for
engaging locking screws, and 1" (25mm) clearance on each side. |
Tilt Mirrors
B-293, B-294
 B-293
SERIES TILT MIRRORS provide visibility for wheelchair patients. Frame is type-304
stainless steel, satin finish. Special bevel design hugs mirror. No. 1 quality, ¼"
(6mm) glass mirror electrolytically copper plated. Mirror extends 4" (10cm) from wall
at top and tapers to 1" (25mm) at bottom.
| STANDARD STOCK SIZES B-293
SERIES MIRROR |
|
Model No. |
Width |
Height |
|
|
B-293 1630 |
16" |
30" |
(41 x 76cm) |
|
B-293 1830 |
18" |
30" |
(46 x 76cm) |
|
B-293 1836 |
18" |
36" |
(46 x 91cm) |
|
B-293 2436 |
24" |
36" |
(61 x 91cm) |
Special-order custom size mirrors.
Maximum size mirror: 36" x 48" (914 x 1219mm)
|
B-294 SERIES TILTING MIRRORS Tilt forward to
provide full visibility for wheelchair patients or return to upright position. Frame is
¾" x ¾" (19 x 19mm), type-304 stainless steel angle, satin finish. Special
bevel design hugs mirror. No. 1 quality, ¼" (6mm) glass mirror electrolytically
copper-plated. Top of mirror tilts 7" (18cm) from wall with self-locking mechanisms;
bottom of mirror mounts to wall with full-length stainless steel hinge.
| STANDARD STOCK SIZES B-294
SERIES MIRROR |
|
Model No. |
Width |
Height |
|
|
B-294 1624 |
16" |
24" |
(41 x 61cm) |
|
B-294 1630 |
16" |
30" |
(41 x 76cm) |
Special-order custom size mirrors.
Maximum size mirror: 30" x 36": (762 x 914mm) |
Vandal-Resistant
 |
 |
| B-942 |
B-9446 |
B-942 FRAMELESS MIRROR
(Secured From Front)
Mirror is 11¼" x 17¼" (285 x 440mm) overall, 1/4" (6mm) deep. 18-gauge
(1.2mm), type-430 stainless steel with bright polished finish.
B-9446 FRAMED MIRROR (Secured
From Rear)
Reflective surface: type-304 bright polished stainless steel. Frame:
14-gauge (2mm), type-304 stainless steel with satin finish; 5/8" (16mm) deep; corners
heliarc welded, ground and polished smooth. Mirror protected by ½" (13mm) thick
fiberboard backing. Overall mirror size: 12" x 16" (305 x 405mm).
B-9436 Similar to B-9446, but secured from front. |
|
| USA & Canada QuickShip model. USA
QuickShip model. |
|
Copyright © 1996–2008 AECinfo.com
|
|
