| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|


|
| |
|
| |
Bobrick Washroom Equipment Toilet and Bath Accessories Grab Bars - Pages 36 & 37
 |
| Grab Bars Comply With
Barrier-Free Design Codes |
Clearance between
wall and grab bar |
- Constructed of satin-finish stainless steel tubing in 1¼" and
1½" (30 and 40mm) diameters; concealed or exposed mounting.
- Peened nonslip griping surface available on all Series. Add suffix
.99 to model number. (Grab bars with peened grip shown in bold face in chart below.
- Bar 18-gauge (1.2mm), type-304 stainless steel.
- Bar passes through flange and is heliarc welded to form single
structural unit.
- Comply with structural strength requirements: grab bars that provide
1½" (40mm) clearance from the wall can support loads in excess of 900 pounds (408kg)
when properly installed, meeting ADA Accessibility Guidelines in U.S.A.
- Mandrel bending process ensures uniform bar diameter around curves.
- All joints and supports are contour cut and welded.
- Concealed anchors and fasteners available as an optional accessory.
|
| DESIGNER'S NOTE Any grab bar configuration not included within a Series row in the table
below is available on special order.
BARRIER-FREE WASHROOM GUIDELINES
GRAB BARS. Diameter of grab bars should be 1¼" to 1½"
(30-40mm) with 1½" (40mm) clearance from the wall. Grab bars should not rotate in
their fittings. The required mounting height is universally 33" to 36"
(840-915mm) from the centerline of the grab bar to the finish floor. The structural
strength of all grab bars and their mounting devices should withstand more than 250 pounds
of force (1112 N). For all barrier-free toilet compartments, individual toilet rooms and
guest bathrooms, it is recommended that a 36" (915mm) min. horizontal grab bar be
installed on the back wall over the toilet and a 42" (1065mm) min. horizontal grab
bar be installed on the side wall or partition nearest the toilet. This can also be
accomplished with a single horizontal two-wall grab bar. |
EXPOSED MOUNTING
- Flange 1/8" (3mm) thick, type-304 stainless steel plate, 3" (75mm) diameter.
- Exposed mounting screw holes; vandal-resistant screws available as an
optional accessory
| Series |
Diameter |
*Finish |
| *B-6106 |
1½" (40mm) |
Satin Finish |
| *B-490 |
1¼" (30mm) |
Satin Finish |
*Peened nonslip gripping surface available. Add suffix .99 to
model number.
|
CONCEALED
MOUNTING WITH SNAP FLANGE
- Cover snaps over mounting flange to conceal screws.
- Concealed mounting flange 1/8" (3mm) thick, type-304 stainless steel plate, 2" W x 3 1/8" H (50 x
80mm) with screw holes for concealed anchors.
- Cover is 22-gauge (0.8mm), type-304 stainless steel with satin
finish, 3¼" (85mm) diameter.
| Series |
Diameter |
*Finish |
| *B-6908 |
1½" (40mm) |
Satin Finish |
| *B-5806 |
1¼" (30mm) |
Satin Finish |
*Peened nonslip gripping surface available. Add suffix .99 to
model number.
OPTIONAL MOUNTING KITS.
Order one per flange. Part No. 252-30 (3) sheetmetal screws; 2521-30 (3)
machine screws with toggle nuts; 2522-30 (3) machine screws with expansion shields.
OPTIONAL ANCHOR DEVICES.
Part No. 2562 concealed anchor plates for stud walls (order one per pair of
flanges); 2571 and 2573 concealed anchors for solid walls (order one per
flange); 2581 and 2583 anchors for ¾" to 1" (19-25mm) panels
(order one per flange); 2584 and 2586 anchors for ½" (13mm) panels
(order one per flange); 2591 and 2592 anchors for ¾" to 1"
(19-25mm) panels two grab bars back-to-back (order one per pair of flanges); 2594
and 2595 anchors for ½" (13mm) panels, two grab bars back-to-back (order one
per pair of flanges).
|
GRAB BAR
CONFIGURATIONS
CLASSIC SERIES: RED |

Straight
|
48"
(1220mm)
Horizontal
|
|
|
|
|
|
OPTIONAL
MOUNTING DEVICES
Order for each Series using part numbers listed below. See descriptions in footnotes below
table. |
16" W x 32" H (41 x 81cm) |
33" H x 30" D (84
x 76cm) |
| 90° Angle |
90° Angle |
Wall to Floor
With Outrigger
|
Wall to Floor with
Outrigger |
Wall to Floor With
Socket |
| CONCEALED MOUNTING |
|
|
|
|
|
|
|
B-6806 SERIES
1½" (40mm) dia.
satin finish or
peened grip
snap-flange |
B-6806
x
12", 18", 24", 30", 36", 42", 48"
(305, 455, 610, 760, 915, 1065, 1220mm)
B6806.99 x
24", 36", 42" (610, 915,
1065mm) |
B-68061 x 48
B-68061.99 x 48 |
B-6856
B-6856.99 |
B-6846
B-6846.99 |
B-6819
B-6819.99 |
B-6818
B-6818.99 |
B-6864
B-6864.99 |
252-30
2521-30
2522-30
2562
2573
|
2583
2586
2592
2595
|
B-5806 SERIES
1¼" (30mm) dia.
satin finish or
peened grip
snap-flange |
B-5806
x
12", 18", 24", 30", 36", 42", 48"
(305, 455, 610, 760, 915, 1065, 1220mm)
B5806.99 x
24", 36", 42" (610, 915, 1065mm) |
B-58061 x 48
B-58061.99 x 48 |
B-5856
B-5856.99 |
B-5846
B-5846.99 |
|
|
B-5847
B-5847.99 |
252-30
2521-30
2522-30
2562
2573
|
2583
2586
2592
2595
|
| EXPOSED MOUNTING |
|
|
|
|
|
|
|
B-6106 SERIES
1½" (40mm) dia.
satin finish or
peened grip |
B-6106
x
12", 18", 24", 30", 36", 42", 48"
(305, 455, 610, 760, 915, 1065, 1220mm)
B6106.99 x
24", 36", 42" (610, 915, 1065mm)
|
B-61061 x 48
B-61061.99 x 48 |
|
|
|
|
B-6164
B-6164.99 |
252-30
2521-30
2522-30
2571
|
2581
2584
2591
2594 |
B-490 SERIES
1¼" (30mm) dia.
satin finish or
peened grip |
B-490
x
12", 18", 24", 30", 36", 42", 48"
(305, 455, 610, 760, 915, 1065, 1220mm)
B490.99 x
42"
(1065mm) |
B-4901 x 48
B-4901.99 x 48 |
B-495
B-495.99 |
B-494
B-494.99 |
|
|
B-4964
B-4964.99 |
252-30
2521-30
2522-30
2571
|
2581
2584
2591
2594 |
GRAB BAR
CONFIGURATIONS
CLASSIC SERIES: RED |
36" W x
24" H
(91 x 61cm)
Grab Bar for
Tub/Shower/
Toilet
Compartment |
307/8" W x 157/8" D
(78 x 40cm)
Grab Bar for 36" x 36"
(91 x 91cm)
Shower Stall |
54" W x
36" D
(137 x 91cm)
Grab Bar for
Toilet
Compartment/
Tub/Shower |
Wheelchair
Toilet Comp. |
For use with
bedpan flush valveStraddle |
Patented
Swing Up
(Wall Mounted)
Swing Away
(Floor Mounted) |
Swing Away
(Floor Mounted) |
OPTIONAL MOUNTING
DEVICES
Order for each Series using part numbers listed below. See descriptions in footnotes below
table. |
| CONCEALED MOUNTING |
|
|
|
|
|
|
|
|
|
B-6806 SERIES
1½" (40mm) dia.
satin finish or
peened grip
snap-flange |
B-68616
B-68616.99 |
B-6861
B-6861.99 |
B-68137
B-68137.99 |
B-6893
B-6893.99 |
B-6828
B-6828.99 |
|
|
252-30
2521-30
2522-30
2562
2573
|
2583
2586
2592
2595
|
B-5806 SERIES
1¼" (30mm) dia.
satin finish or
peened grip
snap-flange |
B-58616
B-58616.99 |
B-5861
B-5861.99 |
B-5837
B-5837.99 |
B-5893
B-5893.99 |
|
|
|
252-30
2521-30
2522-30
2562
2573
|
2583
2586
2592
2595
|
| EXPOSED MOUNTING |
|
|
|
|
|
|
|
|
|
B-6106 SERIES
1½" (40mm) dia.
satin finish or
peened grip |
B-61616
B-61616.99 |
B-6161
B-6161.99 |
B-6137
B-6137.99 |
B-6193
B-6193.99 |
|
|
|
252-30
2521-30
2522-30
2571
|
2581
2584
2591
2594 |
B-490 SERIES
1¼" (30mm) dia.
satin finish or
peened grip |
B-49616
B-49616.99 |
B-4961
B-4961.99 |
B-4937
B-4937.99 |
B-493
B0493.99 |
|
B-4998
B-4998.99
|
B-4993
B-4993.99 |
252-30
2521-30
2522-30
2571
|
2581
2584
2591
2594 |
USA & Canada QuickShip model. USA
QuickShip model. |
Copyright © 1996-2008 AECinfo.com
|
|