|
|
Bobrick Washroom Equipment
Toilet and Bath Accessories
Bathroom Accessories - Page 38, 39 & 40
Toilet and Bath Accessories
 |
||
| Surface Mounted |  |
|
 |
B-7680 CLASSIC
SERIES SOAP DISH Drawn, one-piece soap dish welded to support arm and flange. Two
ridges to support bar of soap and two drain holes. Bright polished stainless steel.
4½" W, 2" H (115 x 50mm); projects 33/8" (85mm)
from wall. B-76800 Similar to B-7680, built without drain holes. |
|
 |
B-7679 CLASSIC SERIES TOOTHBRUSH AND TUMBLER HOLDER Drawn, one-piece holder welded to support arm and flange. 23/8" (60mm) diameter hole in center of unit to hold tumbler. Accommodates six toothbrushes, three on each side. Bright polished stainless steel. 4¼" W, 2" H (110 x 50mm); projects 41/8" (105mm) from wall. | |
| Bobrick 7600 Series Accessories | |
|
|
 B-7671 Bright polished stainless steel |
 B-76717 Satin-finish stainless steel |
| To specify bright polished stainless steel, use model number shown in catalog. To specify satin-finish stainless steel, add suffix 7 to model number shown. Examples: For B-7671 Single Robe Hook in bright polished stainless steel, specify B-7671; for Single Robe Hook in satin-finish stainless steel, specify B-76717. | |
|
|
CONCEALED MOUNTING BRACKET Unique 2-piece mounting system. Concealed mounting bracket of 20-gauge (1.0mm) stainless steel, welded inside each flange, mounts on 18-gauge (1.2mm) stainless steel wall plate. Includes a stainless steel locking setscrew on bottom. |
|
 |
 |
| B-681 SOAP DISH AND BAR Drawn, one-piece soap dish welded to support arm and flange. Two ridges to support bar of soap and two drain holes. ¾" (19mm) square bar 8½" (215mm) long. Bright polished stainless steel. 12" W, 2" H (305 x 50mm); projects 33/8" (85mm) from wall. |  B-7676 CLASSIC SERIES TOWEL SHELF WITH TOWEL BAR Shelf
6¼" (160mm) wide, consists of four 5/16" (8mm) round tubes mounted in support arms. 1/4" (6mm) round towel bar below shelf. Bright polished stainless steel.
Available in 18" and 24" lengths (455, 610mm). Overall height is 4¼"
(110mm). Projects 8¼" (210mm) from wall.
|
 |
 |
 B-7673 CLASSIC SERIES TOWEL BAR ¾" (19mm) square
towel bar. Bright polished stainless steel. Available in 18" and 24" lengths (455,
610mm). Projects 3¼" (85mm) from wall. B-6735x24 similar to B-7673, but with bright polished brass finish. 24" (610mm) length.
|
B-973 VANDAL-RESISTANT SOAP DISH Extra-heavy,
chrome-plated cast bronze. Bright polished finish. All edges are rounded for safety.
Furnished with tamper-resistant mounting screws. 5" W, 13/8" H, 3" D (125 x 45
x 75mm).
|
 |
 |
| B-683 TOILETRY SHELF Bright polished stainless steel. In 24" length
(610mm). Shelf 4¾" (120mm) wide, projects 55/8" (145mm) from wall. Edges are roll-formed for safety.
|
B-7674 CLASSIC SERIES TOWEL BAR Round
¾" (19mm) diameter towel bar will not rotate. Bright polished stainless steel.
Available in 18" and 24" lengths (455, 610mm). Projects 3¼" (95mm) from wall.
|
 |
|
| B-687 DOOR BUMPER Flange is 2" x 2" (50 x 50mm). Bright
polished stainless steel. Black nylon post with black neoprene bumper. Projects 21/8" (55mm)
from wall. |
|
 |
 |
| B-205 HEAVY-DUTY TOWEL BAR 1" (25mm) dia. bar is 20-gauge (0.9mm),
type-304 stainless steel, satin finish. Support posts ar heavy brass with satin chrome
finish. Flanges are 2¾" (70mm) diameter. Withstands more than 250-lb (113-kg)
downward pull when properly installed. Bar cannot turn in posts. Available in 18" and
24" (455, 610mm) lengths.
|
B-7675 CLASSIC SERIES TOWEL SHELF Available in 18" and 24" lengths (455, 610mm). Shelf 6¼" (160mm) wide, consists of four 5/16" (8mm) round tubes mounted in support arms. Bright polished stainless steel. Projects 8¼" (210mm) from wall. |
 |
 |
| B-7678 CLASSIC SERIES TOWEL RING For bath or
hand towels. Towel ring is 5" (125mm) wide at bottom, tapering to 4 1/8" (105mm) at top; constructed of ¼" (6mm)
diameter bar. Bright polished stainless steel. Projects 2 3/8" (60 mm) from wall. Overall height is 5½" (140mm) |
 B-530 EXTRA-HEAVY-DUTY TOWEL BAR For use in
hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type-304
stainless steel, satin finish. Concealed mounting plate. Withstands 900-lb (408-kg)
downward pull when properly installed. Available in 18"and 24" (455, 610mm)
lengths.
|
DESIGNER'S NOTES A complete selection of recessed and surface-mounted, single- and double-roll, stainless steel toilet tissue dispensers is shown on pages 32 and 33. For added safety in hospital and hotel bathrooms, grab bars are recommended for use as towel bars. Bobrick also offers surface-mounted bathroom accessories for budget installations, including soap dishes, toothbrush and tumbler holders, toilet tissue dispensers, towel bars, and robe hooks. See Bobrick 800 Series technical data sheets for illustrations and complete description.
|
|
 |
|
B-355 RECESSED FACIAL TISSUE DISPENSER Faceplate
type-304 stainless steel, satin finish. Galvanized-steel mounting cabinet. Capacity: 300
two-ply facial tissues. 117/8" W, 61/8" H, 4" D (300 x 155 x 100mm). Rough Wall Opening: 10¾" W,
5¼" H, 4" min. depth (275 x 135 x 102mm). B-3551 Similar to B-355, but faceplate has bright polished finish
|
| |
B-3552 RECESSED FACIAL TISSUE DISPENSER Holds
one pack of 100 two-ply facial tissues. Faceplate type-304 stainless steel, satin finish.
Galvanized-steel mounting cabinet. 117/8" W, 61/88" H, 2¼" D (300 x 155 x 55mm). Rough Wall Opening: 10¾" W,
5¼" H, 23/8" min. depth (275 x 135 x 60mm). B-35521 Similar to B-3552, but faceplate has bright polished finish.
|
|
 |
|
B-8397 SURFACE-MOUNTED FACIAL TISSUE DISPENSER Cabinet
type-304 stainless steel, satin finish. Equipped with concealed locking device; opens with
key provided. Concealed wall plate is 22-gauge (0.8mm), type-304 stainless steel. Holds
one pack of 100 two-ply facial tissues. 10¼" W, 53/16" H, 2¼" D (260 x 130 x 55mm). B-839 Similar to B-8397, but type-430 stainless steel with bright polished finish.
|
 |
B-203 SURFACE-MOUNTED BOTTLE OPENER One-piece,
16-gauge (1.6mm), type-304 stainless steel with satin finish. Opener projects 1"
(25mm) from wall. 17/8" wide, 2¼" high (50 x 55mm). B-206 Similar to B-203, but with bright polished finish.
|
  |
|
B-398 RECESSED MEDICINE CABINET Type-304 stainless steel,
satin finish. Mirror: No. 1 Quality, 1/4" (6mm) glass electrolytically copper-plated.
15-year guarantee against silver spoilage. Door has full-length stainless steel
piano-hinge, magnetic catch and cable doorstop. Four adjustable stainless steel shelves.
Cabinet may be inverted for right- or left-hand door swing. Rough Wall Opening: 15¼"
W, 25½" H, 35/8" min. depth (385 x 650mm x 90mm). Av. Mtg. Ht.: 74" (1880mm) to
top of unit; barrier-free, 66½" (1690mm). B-299 SURFACE-MOUNTED MEDICINE CABINET Similar to B-398, but 5" (125mm) deep. Door is 17" W, 267/8" H (430 x 685mm). Av. Mtg. Ht.: 74" (1880mm) to top of unit; barrier-free, 66½" (1690mm).
|
| |
B-397 RECESSED MEDICINE CABINET All-steel cabinet with baked
white enamel finish. Three adjustable plastic shelves. Mirror: No.1 quality, ¼"
(6mm) glass electrolytically copper-plated. Door has enameled steel piano-hinge and
magnetic catch. Door is 15½" W, 257/8" H (405 x 655mm). Rough Wall Opening: 14" W, 235/8" H,
3½" min. depth (355 x 600 x 90mm). Av. Mtg. Ht.: 73" (1855mm) to top of unit;
barrier-free, 65½" (1665mm).
|
|
| |
B-297 SURFACE-MOUNTED MEDICINE CABINET All-steel cabinet and two fixed shelves with baked white enamel finish. Mirror: No. 1 quality, 1/8" (3mm) glass electrolytically copper-plated. Door has enameled steel piano-hinged and magnetic catch. Door is 141/8" W, 20¼" H (360 x 515mm). Unit is 3¾" (95mm) deep. Av. Mtg. Ht.: 69" (1755mm) to top of unit; barrier-free, 60" (1525mm). |
BARRIER-FREE BATHROOM GUIDELINES MEDICINE CABINETS. Units should be mounted so the bottom edge of the reflective surface is no higher than 40" (1015mm) above the finish floor and at least one accessible shelf is no higher than 44" (1120mm) above the finish floor. SOAP DISHES. It is recommended that soap dishes in all bathing facilities be recessed and placed on the same wall as the shower head and controls where they are least likely to collect standing water. It is recommended that they be mounted 38" to 48" (965-1220mm) above the finish floor, or they should be mounted between the grab bar and the rim of bathtubs. SHOWER CURTAINS. All types of shower installations designed for wheelchair users are generally more accessible when shower curtains are used as enclosures. If other types of enclosures are used, they should fold back completely out of the way so as not to obstruct transfer to shower seats or interfere with controls, and they should not incorporate a track along the rim of bathtubs. GRAB BARS. All accessible bathing facilities require grab bars installed to meet ADAAG specifications. Diameter of grab bars should be 1¼" to 1½" (30-40mm) with 1½" (40mm) clearance from the wall. Grab bars should not rotate in their fittings. The required mounting height is universally 33" to 36" (840-915mm) from the centerline of the grab bar to the finish floor Structural strength of grab bars and their mounting devices should withstand more than 250 pounds of force (1112 N). SHOWER SEATS. L-shaped folding shower seats are required in accessible 36" x 36" (915 x 915mm) shower stalls. They should be mounted on the wall opposite controls with top surface of seat 17" to 19" (430 x 485mm) above the finish floor. Seat should have no more than 1½" (40mm) clearance from walls and should extend the depth of shower stall, allowing space for shower curtain at front of stall. Wide section of L-shaped seat should project no more than 23" (585mm) from wall; the narrow section, no more than 16" (405mm) from wall. If shower seat is provided in 30" x 60" (760 x 1525mm) min. shower stall, it should be folding type and mounted on the wall adjacent to controls. Structural strength of shower seats and their mounting devices should withstand more than 250 pounds of force (1112 N). |
| USA & Canada QuickShip model. USA
QuickShip model. |