|
|
Bobrick Washroom Equipment
Toilet and Bath Accessories
Shower/Tub Accessories - Page 41
Toilet and Bath Accessories
|
|
||
|
|
|
B-4390 RECESSED HEAVY-DUTY SOAP DISH AND BAR Type-304 stainless steel, matte polished finish. Mounting clamp for stud walls. 71/8" W, 51/8" H (180 x 130mm) Rough Wall Opening: 57/8" W, 3¾" H, 4" min. depth (150 x 95 x 102mm). B-4380 Similar to B-4390, but without bar. B-439 RECESSED HEAVY-DUTY SOAP DISH AND BAR Satin finish. Similar to B-4390, but with anchor lugs for embedding in concrete. Rough Wall Opening: 6¼" W, 4¼" H, 2¾" min. depth (160 x 110 x 70mm). B-438 Similar to B-439, but without bar.
|
|
|
|
B-974 RECESSED VANDAL-RESISTANT SOAP DISH (Secured From Rear) 16-gauge (1.6mm), type-304 stainless steel with satin finish. Drawn, one-piece seamless construction. Flange satin finish, soap dish interior matte finish. 7" W, 5" H, 2¾" D (180 x 125 x 70mm).
|
|
|
|
B-636 SURFACE-MOUNTED RETRACTABLE CLOTHESLINE Installs over bathtub or in shower. 8-ft (244cm) clothesline pulls out for convenient use; retracts neatly out of way. Retainer bracket mounts on opposite wall to secure clothesline. Cover and retainer bracket are bright polished stainless steel. Unit is 35/8" x 35/8" (90 x 90mm); projects 1¼" (30mm) from wall. Av. Mtg. Ht.: 70" (1780mm) to top of unit.
|
|
|
|
204-2 VINYL SHOWER CURTAIN Opaque, matte white vinyl .008" 90.2mm) thick, contains antibacterial and flame-retardant agents. Nickel-plated brass grommets along top, one every 6" (150mm). Bottom and sides are hemmed. Hooks are not included. 42" W, 72" H (1065 x 1830mm). Requires 7 hooks.
|
|
|
204-3 Similar to 204-2, but curtain is 70" W, 72" H (1780 x 1830mm). Requires 12 hooks.
|
|
|
|
204-1 SHOWER CURTAIN HOOK Type-304 stainless steel for use on 1" and 11/4" (25 and 30mm) diameter shower curtain rods.
|
|
|
|
|
B-6047 CLASSIC SERIES EXTRA-HEAVY-DUTY
SHOWER CURTAIN ROD Type-304
stainless steel, satin finish. 18-gauge (1.2mm), 1¼" (30mm)
diameter rod. Flanges are 2½" (65mm) square. Available in
lengths up to 96" (2440mm).
|
|
|
B-6107 CLASSIC SERIES HEAVY-DUTY
SHOWER CURTAIN ROD Similar
to B-6047, but with 20-gauge (1.0mm), 1" (25mm) diameter rod. Available
in lengths up to 72" (1830mm).
|
|
|
|
|
B-207 SHOWER CURTAIN ROD WITH CONCEALED MOUNTING
1" (25mm) diameter rod is 20-gauge (1.0mm), type-304 stainless steel
satin finish. 15/8"
(40mm) diameter flanges are chrome-plated brass, bright polished finish;
mount on concealed wall brackets. Available in lengths up to 72"
(1830mm). 36" (915mm).
|
|
|
|
B-508 CORNER FOLDING SHOWER SEAT Type-304 stainless steel, satin finish. Retaining clip holds seat upright. Seat secured to one wall with full-length piano-hinge; supported on other wall by stainless steel mounting bracket. Edges are channel formed for maximum safety. 15½" x 15½" (395 x 395mm) av. Mtg. Ht.: 17-20" (430-510mm) from top of seat to floor.
|
|
|
|
|
|
|
B-517 Similar to B-518, but with right-hand seat.
|
|
|
|
|
|
|
|
|
B-519 Similar to B-5191, but with 2" (50mm) thick, foam-padded, white vinyl seat with enclosed ½" (13mm) plywood base. |
2½
(65mm) Square Flange for B-6047
and B-6107
B-518
FOLDING SHOWER SEAT Meets the needs of the
physically disabled and elderly. Complies with barrier-free accessibility
guidelines. 2" (50mm) thick, foam-padded, white vinyl seat with enclosed
½" (13mm) plywood base. Frame and mounting brackets are type-304
stainless steel and feature self-locking mechanism. Seat measures 33"
(840mm) wide, projects 2213/16"
(580mm) from wall. Av. Mtg. Ht.: 17-20" (430-510mm) from top of seat
to floor. Left-hand seat.
Folded
Down
Folded
Up
DESIGNER'S NOTE Solid phenolic seats available in other colors on special order. See color selection on page 31. |
|