architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Bobrick Washroom Equipment   Toilet and Bath Accessories  

Hooks/Shelves/Custodial Accessories - Page 42

   

Toilet and Bath Accessories

 

SURFACE MOUNTED

 

  B-670 UTILITY HOOK For robes, shoe-shine cloth, an sanitary napkin disposal bag. Flange is 2" x 2" (50 x 50mm). Bright polished stainless steel. Hook ½" (13mm) wide, projects 2" (50mm) from wall.

 

B-6707 Similar to B-670, but with satin finish.

 

 

  B-7671 CLASSIC SERIES SINGLE ROBE HOOK Flange is 2" x 2" (50 x 50mm). Bright polished stainless steel. Projects 1-5/8" (40mm) from wall.

 

B-76717 Similar to B-7671, but with satin finish.

 

  B-6715 Similar to B-7671, but with bright polished brass finish.

 

 

  B-7672 CLASSIC SERIES DOUBLE ROBE HOOK Contoured 4" (100mm) wide bar forms hook at each end. Flange is 2" x 2" (50 x 50mm). Bright polished stainless steel. Projects 1 7/8" (50mm) from wall.
B-76727 Similar to B-7672, but with satin finish.

 

 

  B-7677 CLASSIC SERIES TOWEL PIN Flange is 2" x 2" 950 x 50mm). Bright polished stainless steel. Projects 43/8" (110mm) from wall.

 

B-76777 Similar to B-7677, but with satin finish.

 

 

  B-212 CLOTHES HOOK AND BUMPER Solid aluminum casting, matte finish. Rubber bumper protects wall or partition surfaces. Flange is 1½" W, 2" H (40 x 50mm). Unit projects 3¾" (95mm).

 

 

  B-233 CLOTHES HOOK 11-gauge (3.2mm), type-304 stainless steel, satin finish. Hook is 1¼" x 1¼" (30 x 30mm) and projects 11/8" (30mm) from wall. Unit is 2¼" (55mm) high.

 

 

  B-2116 HEAVY-DUTY CLOTHES HOOK WITH CONCEALED MOUNTING  Locks to wall plate with three stainless steel setscrews for the theft-resistant mounting. Hook and flange are one-piece brass casting with satin nickel plated finish to match stainless steel. Withstands 300-lb (136-kg) downward pull. Flange diameter: 2¾" (70mm). Unit projects 37/16" (85mm) from wall.

 

 

  B-211 Similar to B-2116, but with three exposed countersunk mounting screw holes.

 

 

  B-682 HAT AND COAT HOOK Flange is 2" x 2" (50 x 50mm). Bright polished stainless steel. Hook 1" W, 6¼" H (25 x 160mm); projects 3" (75mm) from wall.

 

B-6827 Similar to B-682, but with satin finish.

 

 

  B-982 VANDAL-RESISTANT CLOTHES HOOK (Secured From Rear) Type-304 satin-finish stainless steel. Back plate is 14-gauge (2mm). Hook snaps down for safety if excessively loaded. 4" W, 4" H, 7/8" D (100 x100 x 20mm). Hook projects 1¼" (30mm) from back plate. Patented.

 

B-983 Similar to B-982, but secured from front with tamper-resistant mounting screws.

 

 

  B-981 VANDAL-RESISTANT CLOTHES HOOK For budget installations. 12-gauge (2.7mm), type-304 stainless steel bracket with 7-gauge (4.5mm) stainless steel hook. Hook pivots down for safety if excessively loaded. Hook tension adjustable. Furnished with tamper-resistant mounting screws. 45/16" H, 1" W (110 x 25mm). Hook projects 3" (75mm) from wall.

 

 

 

  B-232 HOOK STRIP Type-304 stainless steel, satin finish. Hooks are 1" W, 6½" H (25 x 165mm); project 2¼" (55mm) from wall. Mounting strip is 4" (100mm) high and has ¼" (6mm) return.

 

Model No.

No. Hooks

Length

 

B-232x24

3

24" (610mm)

 

B-232x36

4

36" (915mm)

 

B-232x48

5

48" (1220mm)

 

B-232x60

6

60" (1525mm)

 

  B-985 VANDAL-RESISTANT HOOK STRIP Back plate is 14-gauge (2mm), type-304, satin-finish stainless steel. Four stainless steel hooks nap down for safety if excessively loaded. Furnished with tamper-resistant mounting screws. 18" W, 5½" H, 7/8" D (455 x 140 x 20mm). Hooks project 1¼" (30mm) from back plate. Patented.

 

 

  B-968 VANDAL-RESISTANT SHELF WITH HOOKS 14-gauge (2mm), type-304 stainless steel with satin finish. Shelf is 17¼" W, 8" D (440 x 205mm). Four stainless steel hooks snap down for safety if excessively loaded. Furnished with tamper-resistant mounting screws. 18" W, 10½" H, 8¾" D (455 x 265 x 220mm). Patented.

 

 
 

  B-295 STAINLESS STEEL SHELF 5" (125mm) wide, 18-gauge (1.2mm), type-304 stainless steel, satin finish. ¾" (19mm) return edge; front edge is hemmed for safety. Brackets are 16 gauge (1.6mm). Available in one-piece lengths; 16", 18", 24", 36" (405, 455, 610, 915mm).

 

B-296 Similar to B-295, but shelf is 6" (150mm) wide. 18" (455mm).

 

B-298 Similar to B-295, but shelf is 8" (205mm) wide. 24" (610mm).

 

 DESIGNER'S NOTES

Models B-295, B-296 and B-298 stainless steel shelves are available on special order in lengths up to 28 ft (853cm). Shelves longer than 8 ft (244cm) are furnished in multiple sections. 10" and 12" (255 and 305mm) wide shelves are also available on special order. Contact your Bobrick Representative for full details.

 

    B-287 FOLDING UTILITY SHELF Easily installed on toilet partition or wall. Type-304 stainless steel, satin finish. Pull-down shelf returns to upright position when not in use. 14½" long, 5¾" wide (370 x 145mm). Patented.

 

USA & Canada QuickShip model. USA QuickShip model.

 



Request for Information / Request a Catalog from Bobrick Washroom Equipment
 
 
 
To request more information from Bobrick Washroom Equipment, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.