architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Bobrick Washroom Equipment   Grab Bars  

Grab Bars - Page 1

   

Grab Bars

Grab Bars

Constructed of satin-finish stainless steel tubing in 1¼" and 1½" (30 and 40mm) diameters; concealed or exposed mounting.

Peened nonslip griping surface available on all Series. Add suffix .99 to model number. (Grab bars with peened grip shown in bold face in chart below.

Bar 18-gauge (1.2mm), type-304 stainless steel.

Bar passes through flange and is heliarc welded to form single structural unit.

Comply with structural strength requirements: grab bars that provide 1½" (40mm) clearance from the wall can support loads in excess of 900 pounds (408kg) when properly installed, meeting barrier-free guidelines.

Mandrel bending process ensures uniform bar diameter around curves.

All joints and supports are contour cut and heliarc welded.

Concealed anchors and fasteners available as an optional accessory.

 

CONCEALED MOUNTING WITH SNAP FLANGE Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8" (3mm) thick, type-304 stainless steel plate, 3-1/8" (80mm) diameter with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type-304 stainless steel with satin finish, 3-1/4" (85mm) diameter.

 

GRAB BAR
CONFIGURATIONS


Straight




48" (1220mm)
Horizontal 


16" (405mm) with Backrest


40°
Angle 700x850mm


40°
Angle 700x850mm


Swing Up 


with Toilet Tissue Dispenser 

B-6806 SERIES
1½" (40mm) dia.
satin finish or
peened grip
snap-flange 

B-6806 x 11-13/16", 12", 18", 24", 30", 36", 42", 48" (300, 305, 455, 610, 760, 915, 1065, 1220mm)
B-6806.99 x 24", 36", 42" (610, 915, 1065mm) 

B-68061 x 48
B-68061.99 x 48 

Special
Order
Only

Special
Order
Only

Special
Order
Only

NA

NA

B-5806 SERIES
1¼" (30mm) dia.
satin finish or
peened grip
snap-flange 

B-5806 x 11-13/16", 12", 18", 24", 30", 36", 42", 48" (305, 455, 610, 760, 915, 1065, 1220mm)
B-5806.99 x 24", 36", 42" (610, 915, 1065mm)

B-58061 x 48
B-58061.99 x 48 

B-5891

B-5891.99

B-5855

 B-5845

NA

NA

B-490 SERIES
1¼" (30mm) dia.
satin finish or
peened grip
exposed mounting

B-490 x 12", 18", 24", 30", 36", 42", 48" (305, 455, 610, 760, 915, 1065, 1220mm)

B-4901 x 48
B-4901.99 x 48 

Special
Order
Only

Special
Order
Only

 Special
Order
Only

B-4997
B-4997.99

B-4999
B-4999.99

 

 



Request for Information / Request a Catalog from Bobrick Washroom Equipment
 
 
 
To request more information from Bobrick Washroom Equipment, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.