Grab Bars - Page 2

Shower Seats and Specialty Products

Folded Down
 
Folded Up

B-5181 FOLDING SHOWER SEAT Meets the needs of the physically disabled and elderly. Complies with barrier-free accessibility guidelines. Seat is constructed of durable, water-resistant, ivory-colored ½" (13mm) thick solid phenolic. Frame and mounting brackets are type-304 stainless steel and feature self-locking mechanism. Seat measures 33" (840mm) wide, projects 22-13/16" (580mm) from wall. Av. Mtg. Ht.: 17–20" (430–510mm) from top of seat to floor. Left-hand seat.

B-5171 Similar to B-5181, but with right-hand seat.

B-5191 SHOWER/DRESSING-AREA SEAT Compact design. Seat is constructed of durable, water-resistant, ivory-colored, 5/16" (8mm) thick solid phenolic. Frame and mounting bracket are type-304 stainless steel and feature self-locking mechanism. Seat measures 18" (455mm) wide, projects 15-13/16" (400mm) from wall. Av. Mtg. Ht.: 17-20" (430-510mm) from top of seat to floor.

B-519 Similar to B-5191, but with 2" (50mm) thick, foam-padded, white vinyl seat with enclosed ½" (13mm) plywood base.

DESIGNER'S NOTE
Solid phenolic seats available in other colors on special order.

B-224x36 SHELF WITH MOP AND BROOM HOLDERS AND RAG HOOK Shelf is 18-gauge (1.2mm), type-304 stainless steel, satin finish; 36" long, 6" high, 8" deep (915 x 150 x 205mm). Anti-slip mop holders have spring-loaded rubber cam that grips handles 7/8" to 1¼" (20–30mm) diameter. Holds mops 8" (205mm) from wall. Stainless steel rag hooks. Rod for wet rags below shelf. 

B-232x24 HOOK STRIP Type-304 stainless steel, satin finish. Hooks are 1" W, 6½" H (25 x 165mm); project 2¼" (55mm) from wall. Mounting strip is 24" long, 4" high (610 x 100mm) and has ¼" (6mm) return.

B-212 CLOTHES HOOK AND BUMPER Solid aluminum casting, matte finish. Rubber bumper protects wall or partition surfaces. Flange is 1½" W, 2" H (40 x 50mm). Unit projects 3¾" (95mm).

B-233 CLOTHES HOOK 11-gauge (3.2mm), type-304 stainless steel, satin finish. Hook is 1¼" x 1¼" (30 x 30mm) and projects 1-1/8" (30mm) from wall. Unit is 2¼" (55mm) high.

B-2116 HEAVY-DUTY CLOTHES HOOK WITH CONCEALED MOUNTING  Locks to wall plate with three stainless steel setscrews for the theft-resistant mounting. Hook and flange are one-piece brass casting with satin nickel plated finish to match stainless steel. Withstands 300-lb (136-kg) downward pull. Flange diameter: 2¾" (70mm). Unit projects 3-7/16" (85mm) from wall.

B-223x36 MOP AND BROOM HOLDER Type 3-4 stainless steel, satin finish Anti-slip mop holders have spring-loaded rubber cam that grips handles 7/8" to 1¼" (20-30mm) diameter. Holds mops 3¼" (85mm) from wall. 36" long, 5" high (915 x 125mm).

B-295 STAINLESS STEEL SHELF 5" (125mm) wide, 18-gauge (1.2mm), type-304 stainless steel, satin finish. ¾" (19mm) return edge; front edge is hemmed for safety. Brackets are 16 gauge (1.6mm). Available in one-piece lengths; 18",24" (455, 610mm).

B-287 FOLDING UTILITY SHELF Easily installed on toilet partition or wall. Type-304 stainless steel, satin finish. Pull-down shelf returns to upright position when not in use. 14½" long, 5¾" wide (370 x 145mm). Patented.