Soap Dispensers (Bobrick Washroom Equipment)

Soap Dispensers

	State-of-the-art engineering and design for dispensing a wide variety of liquid and lotion soaps.
	All models feature non-proprietary universal dispensing, facilitating the use of economical bulk soaps.
	Basin-mounted dispensers have been an industry standard for decades, and are now incorporated into an ingenious under-counter reservoir system, dramatically reducing labor and maintenance costs.
	Specifiers may also choose from a selection of recessed and surface-mounted models, at a variety of price points, design- integrated for installation with several of Bobrick’s accessory series
	All Bobrick soap valves meet barrier-free standards: operable with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2N) when soap container is full.

Top-Filling Basin Mounted

Under-Counter Reservoir System

Eliminates frequent refilling of single soap dispensers, reducing maintenance time and labor costs.
Large-capacity under-counter reservoir feeds multiple basin-mounted dispensers; check and top-fill from any dispenser.
Ideal for large, heavy-traffic industrial and public washrooms.
Features patented B-822 Series soap dispensers with 36" (915mm) long supply tube which can be cut-to-fit in the field.
Equipped with 10" (255mm) long, translucent plastic elbow for visible soap level and 33" (840mm) flexible connector hose which can be cut-to-fit in the field.
Specify one unit for each basin; each providing 0.9-gal. (3.3-L) soap capacity, plus capacity of pipe connections.

FOR DISPENSING LIQUID AND LOTION SOAPS, AND SYNTHETIC DETERGENTS

DESIGNER'S NOTES

Mount through 1" (25mm) diameter hole in basin or countertop.
Diameter of escutcheon: 2-1/16" (50mm).
Maximum height from base of body to bottom of container: 14-5/8" (370mm) for B-822, B-8225, B-8226, B-82265. Allow clearance below basin for 3½" (90mm) diameter container.
Mount so end of spout extends over inner edge of basin.

Soap Dispensers - Page 1