Polymer
Modified Sanded Tile Grout
Bonsal®
Sanded Tile Grout is a polymer modified portland cement based blend that provides hard,
uniformly colored, wear resistant joints with greater bonds and compressive strength than
normal sanded floor grouts. It is available in ceramic grade (25#) for 1/8" to
1/4" grout joints and All Purpose grade (10#, 25#, 50#) for 1/8" to 3/8"
grout joints. BONSAL® Sanded
Tile Grouts are resistant to alkalis, abrasion, and temperatures up to 500ºF
(260ºC). Constant exposure to corrosive acids will cause serious deterioration of
any portland cement grout. Bonsal®
polymer modified sanded tile grout meets ANSI A118.6.
Polymer Modified Unsanded Tile
Grout
Bonsal®
Unsanded Tile Grout are polymer modified portland cement grouts used to fill joints up to
1/8" wide between ceramic, mosaic, clay tiles and marble. When mixed with clean
water and properly cured, they form smooth hard grout joints that enhance the beauty of
the tile itself. They can be used on interior and exterior wall or floor
installations and contain no organic material that could deteriorate or support growth of
fungus or mildew. BONSAL®
Unsanded Grouts are available in 35 standard and designer colors, in 10# size. White
is available in 10# and 25# bags. Bonsal®
polymer modified unsanded tile grout meets ANSI A118.6.
Sanded and Unsanded Tile Grout
Colors |
Associations and Memberships
