Tile Setting Products (WR Bonsal Co.)

Epoxy Mortars and Grouts
Epox-E-Set AAR-11 HT Mortar and Grout Epox-E-Set AAR-II HT is a 100% solid two-part epoxy system that is acid and alkali resistant. AAR-II HT offers greater resistance to attack from a broader range of chemicals and has greater compressive strength than cement-based products. Epox-E-Set is stable at temperatures up to 350ºF. AAR-II HT is sag resistant so it is ideal for floors and walls. Available in quarts (4/case), 1 and 3 gallon units and is available in ten colors. AAR-II HT is manufactured per the Tile Council of America formula, and meets ANSI A 118.3. AAR-II HT is recommended where exposure to the following chemicals is encountered:
Acetic Acid (3%) Aluminum Fluoride Ammonium Bromide Amyl Alcohol Baking Soda Barium Hydroxide Beer Benzyl Acetate Bromine Water Butanol Calcium Chloride Calcium Hydroxide Carbon Tetrachloride Carbon Disulfide Chromic Acid (IO%) Citric Acid (20%) Cooking Grease Detergents Ethyl Alcohol Fats Ferric Chloride Household Ammonia Hydrobromic Acid (I 00/o)	Hydrochloric Acid (37%) Hydrofluoric Acid (48%) Hydriodic Acid (20%) Nitric Acid (IO%) Petroleum Products P-Nitrotoluene Phosphoric Acid (IO%) Potassium Hydroxide (50/o) Potassium Hypochlorite Pyridine (20%) Sodium Carbonate Sodium Hydroxide Sodium Hypochloride (bleach) Sodium Hypochlorite Soy Sauce Sulfuric Acid (45%) Sugar Tnsodium Phosphate (50/o) Vegetable Oils Wine
Colors


White	Almond

Sterling Silver	Grey

Pebble Brown	Taupe

Brick	Hunter Green

Onyx Black	French Mocha
Custom colors blended in minimum I 00 gallon quantities. *All epoxies tend to darken or discolor when exposed to ultraviolet light and occasionally with incandescent and fluorescent light - most noticeable in lighter colors.
B-150 Epoxy Adhesive B-150 Epoxy Adhesive is an impermeable, 100% solids, water cleanable, two-component epoxy adhesive system designed for setting all ceramic, brick, stone, slate, etc. on floors and walls. It offers outstanding acid and alkali resistance and is easy to spread. B-150 is perfect for setting tile over solid vinyl flooring, plywood or difficult to bond substrates. Meets ANSI A 118.3. Available in I gallon units.	B-800 Modified Epoxy Emulsion Mortar and Grout B-800 Epoxy Mortar and Grout is a three-part emulsion system used for setting and grouting all types of ceramic tile, pavers, quarry tile, slate, and granite over sound plywood floors and vinyl tile. B-800 is extremely strong and provides the necessary support required when installing tile over floors with slight structural movement. Available in a 35.5# unit and a 355# industrial unit; black, white and grey.

Epoxy Mortars and Grouts