|
|
Bradford White Corp.
Complete Residential Water Heater Line
Residential Water Heater Line Page - 2
Complete Residential Water Heater Line
POWERCOR® INDIRECT-FIRED MODELS |
The PowerCor Indirect Fired System is the perfect compliment for an existing boiler system. The PowerCor utilizes heating fluid from the
boiler to efficiently and economically supply additional volumes of potable hot water. Here's how it works: The heated fluid is circulated
through the UltraCoil housed inside the PowerCor. As the heating fluid is circulated, the unique properties of the UltraCoil transfer the heat to
the potable water stored within the tank, raising it to a usable temperature.
M2 POWERCOR MODEL FEATURES
- 2" Non-CFC Foam insulation
- Vitraglas lining
- Factory installed dielectric waterway fitting (potable water side)
- Protective magnesium anode rod
- Factory installed Hydrojet Total Performance System
- T&P relief valve opening on top of unit
- Stand-by heat loss is less than 1/2° per hour
- Solid brass drain valve
M2 POWERCOR ENERGY SAVER INDIRECT-FIRED MODELS
Model |
Gallon |
A |
B |
C |
D |
Approx. Shipping Weight (Lbs.) |
M2-P-40R10 |
40 |
20" |
46 3/4" |
48" |
46 3/4" |
112 |
M2-P-50R10 |
50 |
22" |
46 1/4" |
47 1/4" |
46 1/4" |
139 |
M2-P-65R10 |
65 |
22" |
58 3/4" |
60" |
58 3/4" |
165 |
M2-P-80R10 |
80 |
24" |
58 3/4" |
59 1/2" |
58 3/4" |
192 |
|
M2-P-40R10 |
M2-P-50R10 |
M2-P-65R10 |
M2-P-80R10 |
Rec. GPH @ 90° Rise* |
75 |
77 |
90 |
94 |
1st Hour Rating @ 140°F |
104 |
115 |
139 |
150 |
1st Hour Rating @ 115°F |
162 |
180 |
217 |
234 |
Note: |
Minimum Boiler Output: 70,000 BTU/H for M2P (40,50) R10 |
|
Minimum Boiler Output: 84,000 BTU/H for M2P (65, 80) R10 |
|
Boiler Supply Temperature: 180°F Minimum |
|
*90°F Rise from 50° to 140°F. |
|
Numbers subject to change. |
