COMBICOR® DIRECT-FIRED MODELS |
Now with one unit, ample domestic hot water and comfortable radiant heat with one economical and truly amazing
product, the CombiCor Direct-Fired System. Engineered to utilize no more space than a conventional water heater,
the CombiCor installs easily and operates efficiently. This unit differs from similar products because it features two
exclusive Bradford White patents, the Hydrojet Total Performance System and the UltraCoil Heat Transfer System.
Because of its small footprint, easy installation and compatibility with various heating systems, CombiCor is at home
in both new construction and replacement installations. Perfect for radiant floor and ceiling installations, this
combination unit also provides ample power for many perimeter baseboard installations.
THE COMBICOR GIVES YOU A COMBINATION OF GREAT ADVANTAGES OVER OTHER SYSTEMS.
- Lower Annual Operating costs.
- Reduced Energy Consumption.
- A Single Source for All Hot Water and Heating Needs.
- Compatibility with Multiple Space Heating Methods.
- Priced Well Below Comparable Systems.
STANDARD FEATURES ON COMBICOR
- 2" Non-CFC foam insulation. (1" on oil models)
- Vitraglas lining.
- Factory installed dielectric waterway fittings (potable water side).
- Solid brass drain valve.
- Protective magnesium anode rod.
- Factory installed Hydrojet Total Performance System. (except M2-C-TW models.)
- Heat Exchanger - UltraCoil® Heat Transfer System
COMBICOR MODEL FEATURES
- Dual purpose - for both potable water and space heating.
- T&P relief valve installed.
- Anti-scald device supplied with unit.
COMBICOR ENERGY SAVER DIRECT-FIRED MODELS
Model |
Nat. & LP
Input BTU |
Stg. Cap.
U.S. Gal. |
A
Height |
B
Diameter |
C
Floor to
Top
Water
Conn. |
D
Floor to
T&P
Conn. |
E
Gas
Conn. |
F
Top Vent
Ht. |
Vent. Dia. |
Water
Conn. |
Gas
Conn.
Dia. |
Relief
Valve
Open. |
Approx.
Shipping
Weight
(Lbs.) |
M2-C-504T10CN* |
65,000 |
46.5 |
57 1/4" |
22" |
58" |
50 3/4" |
14" |
61 1/8" |
4" |
3/4" |
1/2" |
3/4" |
169 |
M2-C-75T10CN |
80,000 |
73.5 |
60 1/4" |
26" |
61 1/4" |
53" |
16 1/2" |
63 3/4" |
4" |
3/4" |
1/2" |
3/4" |
303 |
|
M2-C-504T10CN |
M2-C-75T10CN |
Input |
65,000 |
80,000 |
Water Heating† |
|
|
|
CAEF |
.55 |
.52 |
|
Thermal Efficiency |
DNA |
82.6 |
|
First Hour Rating |
100 |
131 |
|
Rec. Rate 90°F Rise |
67 |
89 |
Space Heating |
|
|
|
CAafue% |
80.0 |
82.4 |
|
Heating Capacity‡ |
50,000 |
65,000 |
†Based on ANSI Z21.10.3 and DOE Test Methods.
‡Based on ANSI/ASHRAE 124 Standard.
Actual values may vary based on circulator flow rate, number of zones, water and space heating demands.
Numbers subject to change.
* Propane (LP) Inputs |
1ST HR. DEL. |
RECOVERY GPH
90° RISE |
M2C504T10CX 63,000 BTU/H |
92 |
65 |
