architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Bradford White Corp.   Complete Residential Water Heater Line  

Residential Water Heater Line Page - 10

   

Complete Residential Water Heater Line

RESIDENTIAL ELECTRIC

RESIDENTIAL ENERGY SAVER ELECTRIC WATER HEATERS

  • ISO 9001-1994 Standard - Bradford White is ISO registered to the 9001 - 1994 standard.
  • Non-CFC Foam Insulation - surrounds the tank surface and is available on all models.
  • Factory installed dielectric waterway fittings.
  • Protective magnesium anode rod.
  • Factory installed Hydrojet Total Performance System - This cold inlet device reduces sediment, minimizing temperature buildup at the top of the tank and increases first hour delivery.
  • Fully automatic controls.
  • T&P relief valve - opening on top of the tank.
  • 6 Year Limited Tank Warranty.
  • 2 Year Limited Parts Warranty.
  • 4500W incoloy elements standard on Optimizer models.
  • Solid brass drain valve.


OPTIMIZER DELUXE HIGH EFFICIENCY SERIES UPRIGHT

 

Model

 

Gallon Capacity

A

Jacket Diameter

B

Height Floor to Heater Top 

C

Height Floor to Water Conn. 

D

Height Floor to T&P Conn.

GPH Recovery 90°F. Rise

Approx. Shipping Weight (Lbs.)

M-III-40T6DS

40

20" 

59 1/2"

60 3/4"

59 1/2"

20

118

M-III-50T6DS

50

22"

57 1/4"

58 1/4"

57 1/4"

20

131

M-III-65R6DS

65

24"

58 3/4"

60"

58 3/4"

20

160

M-III-80R6DS

80

26"

58 3/4"

59 1/2"

58 3/4"

20

191

NOTE: The Upright Heaters will be wired inter-locking (non-simultaneous) 240 volt with 4500 watt elements, unless otherwise specified. Other wattages are available up to 6000 watts non-simultaneous and 11,000 watts simultaneous 240 volts. For single element models change letter "D" to "S". Suffix letter S indicates Screw-Type Elements. Upright models equipped with two installed heat traps and 3" Non-CFC foam insulation. Meets California Energy Commission and California Title 24 requirements. For 10 year models, change suffix number from "6" to "10". All water connections are 3/4" NPT.


DELUXE ENERGY SAVER UPRIGHT 

 

Model

 

Gallon Capacity

A

Jacket Diameter

B

Height Floor to Heater Top 

C

Height Floor to Water Conn. 

D

Height Floor to T&P Conn.

GPH Recovery 90°F. Rise

Approx. Shipping Weight (Lbs.)

M-II-30R6DS

30

18"

46 1/2"

47 1/4"

46 1/2"

20

85

M-II-40S6DS

40

20"

46 3/4"

48"

46 3/4"

20

103

M-II-40T6DS

40

18"

59 1/2"

60 3/4"

59 1/2"

20

110

M-II-50S6DS†

50

22"

46 1/4"

47 1/4"

46 1/4"

20

130

M-II-50T6DS

50

20"

57 1/4"

58 1/4"

57 1/4"

20

123

M-II-65R6DS

65

22"

58 3/4"

60"

58 3/4"

20

156

M-II-80R6DS

80

24"

58 3/4"

59 1/2"

58 3/4"

20

183

M-II-120R6DS

119

28"

62 3/4"

64"

62 3/4"

20

305

†Available with optional hand hole cleanout.
NOTE: The Upright Heaters will be wired inter-locking (non-simultaneous) 240 volt with 4500 watt elements, unless otherwise specified. Other wattages are available up to 6000 watts non-simultaneous and 11,000 watts simultaneous 240 volt. For single element models change letter "D" to "S". Suffix letter S indicates Screw-Type Elements. Upright models equipped with two installed heat traps and 2" Non-CFC foam insulation. Meets California Energy Commission requirements. For 10 year models, change suffix number from "6" to "10". All water connections are 3/4" NPT.


ENERGY SAVER UPRIGHT

 

Model

 

Gallon Capacity

A

Jacket Diameter

B

Height Floor to Heater Top 

C

Height Floor to Water Conn. 

D

Height Floor to T&P Conn.

GPH Recovery 90°F. Rise

Approx. Shipping Weight (Lbs.)

M-I-30R6DS

30

16"

46 1/2"

47 1/4"

46 1/2"

20

80

M-I-40S6DS

40

18"

46 3/4"

48"

46 3/4"

20

96

M-I-40T6DS

40

16"

59 1/2"

60 3/4"

59 1/2"

20

104

M-I-50S6DS†

50

20"

46 1/4"

47 1/4"

46 1/4"

20

119

M-I-50T6DS

50

18"

57 1/4"

58 1/4"

57 1/4"

20

116

M-I-65R6DS

65

20"

58 3/4"

60"

58 3/4"

20

146

M-I-80R6DS

80

22"

58 3/4"

59 1/2"

58 3/4"

20

174

†Available with optional hand hole cleanout.
NOTE: The Upright Heaters will be wired inter-locking (non-simultaneous) 240 volt with 4500 watt elements, unless otherwise specified. Other wattages are available up to 6000 watts non-simultaneous and 11,000 watts simultaneous 240 volt. For single element models change letter "D" to "S". Suffix letter S indicates Screw-Type Elements. Upright models equipped with two installed heat traps and 1" Non-CFC foam insulation. Meets California Energy Commission requirements. For 10 year models. Change suffix number from "6" to "10". All water connections are 3/4" NPT.



Request for Information / Request a Catalog from Bradford White Corp.
 
 
 
To request more information from Bradford White Corp., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.