Bradley Washfountains - Page 14

Terreon^® Deep Bowl Washfountain

Circular Washfountain with 8-1/2" Deep Bowl

• ADA Compliant
• Available in a 54" Bowl Size
• Reliable Infrared or Pushbutton
• Vandal Resistant - Easy to Clean

Specifications

Size and Capacity : Accommodates up to 8 users at a time, using less water, energy and space than lavs equipped with conventional faucets. The non-sectional sprayhead module is controlled by an infrared sensor-actuated solenoid valve or by a pushbutton which activates an air valve. Flow at 4.5 GPM when properly adjusted. Operating range is 20-100 PSI.

Bowl Materials : Constructed of Terreon^®, a densified solid surface material composed of polyester resin and a UV stabilizer. Terreon^® is resistant to stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.

Pedestal : Tapered pedestal is fabricated from a reinforced, gel-coated fiberglass. The pedestal incorporates a large access panel, for ease of installation and maintenance, as well as a 6" stainless steel kickplate to prevent damage.

Vandal Resistance : All streamformers, infrared sensors and lenses are secured to the unit from inside the sprayhead to prevent tampering. The adaptive infrared sensor will automatically shut off water flow after 30 seconds if a vandal attempts to trigger constant operation by covering the sensor or by placing a stationary object in the sensors detection area. All valving, water supplies and waste connections are concealed inside the pedestal. The Terreon ® bowl is resistant to stains, burns and impact; surface damage is repairable and once repaired, undetectable.

Barrier-Free (ADA Compliant)

The 54" Terreon^® Deep Bowl washfountain equipped with infrared control complies with all ADA guidelines on reaches, clearances and operations.

Valves and Fittings : In addition to bowl and pedestal, the following valves and fittings are standard: sprayhead with stainless steel support tube and bowl gasket; spud with locknut and beehive strainer; sprayhead supply tubing; thermostatic mixing valve, stops, checks, strainers, flexible stainless steel supply hoses; and volume control valve.

Infrared Sensor : Hands placed within the bowl are detected by an infrared sensor module which activates a flow of tempered water from the non-sectional sprayhead. Shut-off is automatic after hands are removed from the detection area.

The adaptive infrared sensor module uses conical shaped
transmitting beams, each having a detection area not exceeding the bowl perimeter. The detection range projects approximately 18" long and 45° off horizontal.

The infrared sensor is not affected by varying color tones or darkness. Direct sunlight or bright washroom lights (up to 10,000 ft. candles) will not activate the system. Infrared models also include two (2) 3/4" NPT solenoid valves and low voltage transformer as standard equipment:

• Solenoid - 24V, 50/60 Hz, 3/4" NPT. Few moving parts, and resistant to most chemicals, minerals and  impurities in municipal water.
• Low Voltage Transformer -  Class II, 110/24 VAC plug-in transformer. Location of transformer per     local electrical code.

Air Valve Hand Control: Each pushbutton pneumatically actuates a non-hold-open air single temperature valve with field adjustable timing from 0–60 seconds. Factory set at 10 seconds minimum. Each pushbutton activates a flow of tempered water from the non-sectional sprayhead.