Wall Sleeves

Wall sleeves provide fixture wall openings in concrete block and poured or precast concrete walls. The sleeves are fabricated of corrosion-resistant steel. Solid corrosion-resistant steel bars are integrally attached to the frame for extra reinforcement and to provide cell security if the fixture is removed. The sleeves are installed in the forms or grouted into block walls, becoming a permanent part of the wall.

Wall Thickness

Bradley furnishes wall sleeves for 4", 6", and 8" thick concrete walls as well as 3-5/8", 5-5/8", and 7-5/8" thick concrete block walls.ect one

one

Dimensions shown in parentheses are millimeters.

Description Notes:

1. Centerline notches indicate centerline of fixture.
2. Wall flange (install on chase side of wall).
3. Horizontal notches indicate showerhead height at its tip.
4. Holes are provided on chase side flange for securing wall frame to forms.
5. Wall openings (shaded areas).