 |
EXPLOSION LATCH |
PART NUMBER
271-001 EXPLOSION LATCH
206-002 KEEPER
Hardware shown is for Project-Out Explosion Venting
Systems.
Required release pressures differ with job requirements and
as each venting system size and structure reacts differently under pressure loads, it is
not possible to state release loads obtainable.
Unit testing is usually required for job approval.
Adjustment may be necessary in the positioning of the
strike and/or the angle of engagement.
Use of this Explosion Latch has been approved by Factory
Mutual on venting systems that they have tested.
Please contact our Engineering Department for additional
assistance. |
