| * The 14 addtional Rouleau® Matching colors(see
page 5) will be stocked in 4" cove products only. All other sizes ans styles will be
special order in this colors.
** End stops are applied where flush casings are used. End
Stops are made 10" long with both ends as stops, however, one end will have some
trimmed off (now less than 10") so it can be used as a right sideend stop or a left
side end stop.
Thermal-Set Rubber Base shall be molded, vulcanized rubbe
base manufactured of first quality rubber components, containing no reclaimed rubber, by
Burke Flooring Products Division of Burke Industries.
| Specifications: |
Federal Spec SS-W-40a type1, Styles A&B |
|
ASTM E84 > Class B rating with smoke
density of 150-200 |
BurkeBase® - Continuous Length - Thermoplastic Rubber
| Type&Thickness |
Height |
Length |
Colors |
Outside
Corners |
| 1/8" Cove Base |
4" |
120' |
25 |
Yes |
Continuous Length Rubber Base shall be extruded
thermoplastic rubber made of first quality ingredients.
| Specifications: |
Federal Spec SS-W-40a type1, Styles B |
|
ASTM E84>Class B rating |
BurkeBase® -Vinyl
| Type
&Thickness |
Height |
Length |
Colors |
Outside
Corners |
| .080 Cove Base |
2.5",4" |
4' |
20 |
2.5,4" |
| 1/8" Cove Base |
2.5",4",
6" |
4' |
20 |
2.5,4" |
| .080 Carpet Base |
4" |
4', 120' |
20 |
4" |
| 1/8"Carpet Base |
4" |
4', 120' |
20 |
4" |
Vinyl Base shall be manufactured in an extrusion process of
first quality ingredients, by Burke Flooring Products Division Of Burke Industries.
Specifications: Federal Spec SS-W-40a
Type11, Styles A&B
All BurkeBase® Rubber and Vinyl Base Products have their colors mixed into the
material at the beginning of the manufacturing process to ensure consistent color
throughout the entire finished product. BurkeBase® Products will be smooth and free of imperfections that distract
from their appearance.
Complete Architectural Specifications are available by
contracting your Burke Representative.
BurkeShapes™
Burke Transition Strips, Reducer Strips, Nosings,
and Square Caps
BurkeShapes shall be vinyl manufactured in an extrusion
process from first quality ingredients. All BurkeShapes shall be free of imperfections.
Colors shall be mixed into the materials at the beginning of the manufacturing process to
ensure consistent color throughout the entire finished product.
BurkeShapes are produced in 12 foot lengths in 10
colors.
Rouleau®, Natural Illusions™, Constellation™, and Marble Rubber Tile
Burke Rubber Tile
Style |
Thickness |
Dimensions |
Colors/Patterns |
| Rouleau® |
.120" |
19.68" x 19.68" |
24 |
| Natural Illusions™ |
.125"(1/8") |
12" x 12" |
14 |
| Constellation™ |
.125"(1/8") |
12" x 12" |
12 |
| Marble |
.125"(1/8") |
12" x 12" |
15 |
All Burke Tile products shall be thermal-set, molded rubber
manufactured of first quality vulcanized ingredients, with no reclaimed rubber, by Burke
Flooring Products Division of Burke Industries. Colors shall be mixed into the materials
at the beginning of the production process to ensure consistent color throughout the
entire finished products. All material shall be free of imperfections.
Specifications
| Rouleau® |
Natural Illusions™,Constellation™, and Marble |
| ASTM F1344 Class 1A |
ASTM F1344 Class 1B |
| ASTM E648 Class 1 |
Federal Spec SS-T-312b Type II |
| ASTM E84 Class B |
ASTM E648 Class 1 |
| ASTM D2047 "Static Coefficient
of Friction">.6 minium |
ASTM E84 Class B |
| Indentation>relative static
load w/o permanent indentation is 600 psi |
Indentation>relative static
load w/o permanent indentation is 600 psi |
| ADA Accessibility Guideline
Requirement - floors be stable, firm, and slip-resistant |
ADA Accessibility Guideline
Requirement - floors be stable, firm and slip-resistant |
Complete Architectural Specifictions are available by
contacting your Burke Representative or on the web at http://www.sweets.com
Rouleau®, Natural Illusions™, Constellation™ and Marble
Rubber Stair Treads
Burke Rubber Stair Treads and accessories
(see product chart on opposite page)
All Burke Stair Treads, Risers, and Skirting shall be
thermal-set, molded rubber made of first quality ingredients, with no reclaimed rubber, by
Burke Flooring Production Division of Burke Industries. Colors shall be mixed into the
materials at the beginning of the production process to ensure consistent color throughout
the entire finished products. Surfaces shall be free of imperfections.
Safety Strips are two 1" carborundum strips placed
flush in the tread surface near the nose in accordance with Federal Spec RR-T-650d.
The strips are available in Black, White, or Yellow, Red, Brick Red, Tan, Brown, Grey,
Orange, and Black & Yellow diagonally striped are available by special order.
V1 (Visual Impaired) Strip is one 2" carborundum strip
placed flush in the tread surface near the nose in compliance with ADA and California's
Architectural Spec Title 24. Colors available are same as Safety Strips listed in above
paragraph.
Spcifications
| Rouleau® |
| Federal Spec RR-T-650d Comp A,Type2 |
| Uniform Federal Accessibility Standard-Federal Standard
795 |
| ADA Accessibility Guideline Requirements-floors be stable,
firm, and slip-resistant |
| Indentation-Relative static load without permanent
indentation is 600 psi |
| ASTM D2047 "Static Coefficient of Friction" >
.6 minimum |
| ASTM E648 Class 1 |
| ASTM E84 Class B |
| |
| Natural Illutions™, Constellation™, and
Marble |
| Federal Spec RR-T-650d Comp A,Types 1 and 2 |
| Federal Spec ZZ-T-001237(GSA-FSS) Type II, Class2, A &
B |
| Uniform Federal Accessibility Standard-Federal Standard
795 |
| ADA Accessibility Guideline Requirements-floors be stable,
firm, and slip-resistant |
| Indentation-Relative static load without permanent
indentation is 600 psi |
| ASTM E648 Class 1 |
| ASTM E84 Class B (Class A available upon request) |
Complete Architectural Specifictions are available by
contacting your Burke Representative or on the web at http://www.sweets.com |
