Burke Rouleau^® Stair Tread Round & Square Profile

BURKE CONSTELLATION^™, NATURAL ILLUSIONS^™ & MARBLE STAIR TREAD

* Available in Visually Impaired Design

Burke Adhesives

BR-103 - white acrylic latex for cove and carpet base on dry, porous interior walls.

BR-830
One part Solvent-Free Rubber Tile Adhesive

A fasting, high strength adhesive for installing rubber flooring over clean, dry, porous subfloors. It will adhere to underlayment grade hardboard, associstion grade particle board, exterior grade plywood and moisture-free concrete above grade only.

BR-831
Two Part Solvent-Free Epoxy

This adhesive is for installing 12" x 12" rubber floor tiles and Rouleau^® rubber tiles over a variety of substrates.

BR-831 Advantages:

• Solvent Free
• Non-flamable
• 1:1 mix ratio by volume
• Compressive strength 11,000 to 12,000 psi per ASTM-695-85.
  From standard mix of basic epoxy and hardner per mixing instructions.
• Clean wet apoxy with water dampened rag, dried epoxy is almost impossible to remove.

BR-829

Solvent-Free Epoxy Nose-Filler and Adhesive

Prevents cracking or flexing of treads and nosing by uniformly molding a strong bonding support to the under step. When properly mixed it will not sag and will repair cracks, holes and depressions, warn and broken stair edges. Can also be used as adhesive for installing rubber and vinyl stair treads, risers, and nosings. This solvent freee poxy may be used on wood, concrete, or non-galvanized metal stairs.

All Burke Stair Treads must use nose-filter in the nose.

Custom Colors

Burke offers custom colors in various products. Delivery is 4 to 8 weeks. Minimum orders are as follows:

• BurkeBase^® 4' Lengths: 2,000 lineal feet
• BurkeBase^® Rubber&Vinyl Roll: 15,000 lineal feet
• BurkeTile™:2,000 square feet
• BurkeTreads™: 300 lineal feet