architecture - engineering - construction
Butler Mfg. Co.
Butler Mfg. Co.
Butler Mfg. Co. - Page 18
Butler Mfg. Co.
BUTLER-COTE®
500 FINISH SYSTEM |
|
| |
An industry standout, this high-performance
low-gloss fluoropolymer coating is standard on all exterior Butler painted roofs, wall
panels, trim and accessories. It
consists of a full strength, 70% Kynar 500 ® or Hylar 5000 ®
coating and has set performance standards on building products. With the Butler-Cote ®
finish system, your building will resist fading and chalking and look great now and in the
future.

Compare the Butler-Cote system
performance to silicone polyester paint.
|
|
BUTLER
THERMAWALL TM WALL SYSTEM |
|
|
|
 |
 |
 |
THERMAWALLTM FLUTED
WALL SYSTEM
- 42" panel width saves
installation time and cost
- Concealed fasteners within panel
joint
|
THERMAWALTM FLUTED WALL SYSTEM THERMAWALLTM FINELINE
WALL SYSTEM
- 42'' panel width
- Concealed fasteners within panel
joint provide a nearly flat appearance
|
THERMAWALLTM FLAT
WALL SYSTEM
- 36'' panel width
- Flat, embossed surface provides a
quality, uniform appearance
- Concealed fasteners within panel
joint
|
|
BUTLER
THERMAWALLTM WALL SYSTEM
- Factory-installed foam core
insulation and thermal break joints deliver excellent energy efficiency and added rigidity
- Factory-fabricated transitions allow
the combination of Butler Thermawall panels with other wall materials
- Interior metal face provides an
attractive, durable surface
- Available in 2'', 2 1/2'', 3'' and
4'' thicknesses to match thermal preference needs
|
|
|
|
TEXTURE-COTE
FINISH SYSTEM
PROVIDES A NON-METAL
APPEARANCE ON THE FLAT STYLWALL® WALL SYSTEM
This system has a non-metallic,
stucco appearance and a hard, aggregated fiber-reinforced polymer finish. The finish is
applied at the factory to ensure better quality control and permit year-round
installation. The Flat StylWall ® wall system has a rigid insulation board,
which provides the solid panel desired for this type of architectural application.
Combining good looks with durability, the system resists the effects of impact, abrasion
and weather, and features a full 10-year warranty on material and application.

The Texture-Cote system
is available in four popular colors: Aspen-White, White, Adobe and Gray, and is very
compatible with other building materials.

Note: Colors shown may vary from
actual samples due to variations in the printing process. Colors and color availability
subject to change without notice.

 
|
|