architecture - engineering - construction
Carlisle SynTec Incorporated
Carlisle Single Ply Systems
Carlisle Single Ply Systems - Page 5
Carlisle Single Ply Systems
|
| Typical
Re-roofing Application
- Sure-Seal 45-mil Reinforced EPDM Membrane
- Carlisle Fasteners and Plates
- Acceptable Insulation
- Existing Smooth Surface BUR
Sure - Seal
Carlisle's Mechanically Fastened EPDM Systems:
Can be installed over a variety of substrates
Are lightweight
Features a strong, in-the-seam fastening method
Offer puncture and tear resistance with reinforce
membrane
|
|
NEW CONSTRUCTION |
REROOFING |
| 1 |
WHAT IS THE EXISTING OR NEW DECK TYPE? |
STEEL |
PLYWOOD OR 0SB |
WOOD PLANKS |
GYPSUM & FIBEROUS CEMENT |
LT.WT. CONCRETE |
STRUCTURAL CONCRETE |
SMOOTH SURFACE BUR |
GRAVEL SURFACED BUR |
EXISTING SINGLE-PLY |
| 2 |
WHAT DECK OVERLAYMENT IS REQUIRED? |
INSULATION |
NONE |
HP MAT |
HP MAT |
NONE |
HP MAT |
HP MAT |
INSULATION |
INSULATION |
| 3 |
WHAT ARE CARLISLE'S RECOMMENDED INSULATIONS? |
POLYISO; WOOD FIBERBOARD; WOOD
FIBERBOARD OVER POLYSTYRENE |
REFER TO NEW CONSTRUCTION |
| 4 |
HOW IS THE INSULATION ATTACHED? |
ACCEPTABLE CARLISLE FASTENERS AND
PLATES, REFER TO CARLISLE SPECIFICATIONS BELOW |
REFER TO NEW CONSTRUCTION |
| 5 |
HOW IS THE MEMBRANE ATTACHED |
HP W/ LOCKING OR POLYMER SEAM PLATES |
HP AND HP WOODIE W/ SEAM PLATES |
HP W/ SEAM PLATES |
HP LT.WT. FASTENERS & PLATES OR HP NTB |
LT.WT. FASTENERS & PLATES OR HP NTB |
HP CONCRETE SPIKE OR HD W/ SEAM PLATE |
REFER TO NEW CONSTRUCTION |
Note: For Membrane Specifications, see page 11
FOR TEAR OFF OPTIONS REFER TO NEW CONSTRUCTION ABOVE
Mechanically Fastened Systems Qualify For FM 1-120; 1-90
and 1-160 Ratings. For current Code Approvals and Warranties, visit Carlisle's website, or
contact the Design Analyst located in your regional office. (See page 12). Class A Ratings
available.
|
