architecture - engineering - construction
Carlisle SynTec Incorporated
Carlisle Single Ply Systems
Carlisle Single Ply Systems - Page 8
Carlisle Single Ply Systems
|
| Typical
Application
- Sure-Weld 45-mil Reinforced Membrane
- Carlisle Fasteners and Plates
- Sure-Weld Bonding Adhesive
- Acceptable Insulation
- Structural Deck
Sure - Weld
Sure-Weld Fully Adhered Roofing Systems Offer:
- Superior reflectivity
- Monolithic seaming
- Environmentally - friendly alternatives (no
chlorine-containing ingredients)
|
|
NEW CONSTRUCTION |
REROOFING |
| 1 |
WHAT IS THE EXISTING OR NEW DECK TYPE? |
GYPSUM AND FIBEROUS CEMENT |
LT. WT. CONCRETE |
STRUCTURAL CONCRETE |
PLYWOOD OR OSB |
STEEL |
WOOD PLANKS |
SMOOTH SURFACE BUR |
GRAVEL SURFACED BUR |
EXISTING SINGLE-PLY |
| 2 |
IS INSULATION REQUIRED? |
YES |
*NO |
NO |
NO |
YES |
NO |
NO |
YES |
YES |
| 3 |
WHAT ARE CARLISLE'S RECOMMENDED INSULATIONS? |
POLYISO; WOOD
FIBERBOARD: WOOD FIBERBOARD OVER POLYSTYRENE; |
REFER TO NEW CONSTRUCTION |
| 4 |
HOW IS THE INSULATION
ATTACHED? |
SET INSULATION INTO FAST ADHESIVE, OR USE THE
FOLLOWING FASTENERS RECOMMENDED BY THE ABOVE DECK TYPE |
REFER TO NEW
CONSTRUCTION |
| HP.LT.WT. OR NTB |
LT.WT. OR NTB |
HP CONCRETE SPIKE OR HD 14-10 |
HP AND HP WOODIE |
HP |
HP |
| 5 |
HOW IS THE MEMBRANE ATTACHED? |
SURE-WELD BONDING ADHESIVE |
REFER TO NEW CONSTRUCTION |
Note: For Membrane Specifications, see page
11
*Refer to Carlisle's Sure-Weld Adhered Design Criteria
Portion of the Current Specification.
FOR TEAR OFF OPTIONS REFER TO NEW CONSTRUCTION ABOVE
FM 1-90 and 1-60 Available.
For current Code Approvals and Warranties, visit Carlisle's
website, or contact the Design Analyst located in your regional office. (See page 12).
Fully Adhered System can achieve Class A Ratings.
|
