DESCRIPTION

An elastomeric coating system that provides waterproofing protection to occupied areas below and protects the plywood surface to which it is applied .It is designed as a two coat system for small, light duty applications and as a three coat system for heavy duty use.It provides a safe, slip-resistant, attractive walking surface. The Top coat is available in nine fade-resistant colors.

TYPICAL USE

The CCW-5313System is used for waterproofing patios, balconies, walkways, sun decks and other plywood decks subject to pedestrian traffic.

LIMITATIONS

• Do not apply primer or coatings to a frosty, damp or wet surface.
• Do not proceed with coating application if temperature is below 40ºF or if rain is imminent within 8 hours after application.
• Plywood decks should not be coated or painted on the underside of surface to receive coating
• If deck has a between slab membrane, consult with manufacturer's representative.

PACKAGING

CCW-501 Base Coat, CCW-502 Intermediate Coat and CCW-503 Top Coat: 5 gallon pails and 55 gallon drums.

CCW-557 Primer:

2 gallon units=1 gal. Part A+1 gal. Part B

10 gallon units= 5 gal. Part A+5 gal. Part B

APPLICABLE STANDARDS

AST C 957-81

Complies with VOC regulations including SCAQMD 1113.

UL-790 Class A

TOP COAT COLORS

Standard colors are: Stone Gray, Desert Tan, Brick Red, Evergreen, Colonial Gray, Beige and Clear. Nutmeg, Brown, Pacific Blue, White and Custom colors are available by special order.

WARNINGS AND HAZARDS

Before use refer to MSDS for important warnings and safety information. Use only in areas with adequate ventilation. Avoid breathing vapors. Keep away from heat and flame. Avoid contact with eyes and skin. In the event of skin contact, remove immediately and wash with warm, soapy water. Wear eye protection. Always wash hands before eating.

TYPICAL PROPERTIES

CCW-501 BASE COAT

CCW-502 INTERMEDIATE COAT

CCW-503 TOP COAT