DESCRIPTION

CCW-525 is a liquid-applied , single component, moisture cured, elastomeric, coal-tar free, modified polyurethane which cures to form a flexible, monolithic, waterproof membrane on vertical or horizontal surfaces, above or below grade . The membrane has tenacious adhesion to concrete substrates preventing lateral water migration. The inherent toughness and resilience of CCW-525 Membrane enables it to bridge structural or shrinkage cracks which may develop in the substrate.

TYPICAL USES

CCW-525 is available in two viscosities (H&V) for application to horizontal and vertical surfaces. Typical applications are between structural slab and wearing course on parking garages, plaza decks, balconies, roof decks, terraces, mechanical equipment rooms, fountains, wetrooms, malls and shower stalls. CCW-525 is ideally suited for waterproofing on below grade foundation walls, tunnels, planters and other areas where a seamless, elastomeric waterproofing is required.

LIMITATIONS

• Do not apply CCW-525 to a wet, damp or contaminated surfaces.
• Not recommended for exposed or wearing surfaces.
• If metal pan is used for concrete form, the metal pan must be vented.
• Surface temperature must be above 40ºF and rising.

APPLICABLE STANDARDS

ASTM Specification: ASTM C 836-76

PACKAGING & TYPES

5 gallon pails and 55 gallon drums

CCW-525-H= Horizontal grade (self leveling)

CCW-525-V= Vertical grade (roller or spray)

SHELF LIFE

When stored at temperature below 80ºF, shelf life is six months in the original, unopened container

TECHNICAL DATA

WARNINGS AND HAZARDS

Combustible liquid and vapor. Keep away from heat and flame. Use only with adequate ventilation. Avoid contact with the eyes or skin, especially open breaks in the skin. In the event of skin contact, remove immediately and wash with warm and soapy water. Refer to MSDS for important warnings and product information.