 |
SURE-DRAIN
DRAINAGE COMPOSITES |
Description
SURE - DRAIN Drainage Composites replace costly, old style
aggregate drains of stone, pipe and fabric.
SURE -DRAIN-V is a high-impact polystyrene core covered on
one side with a non -woven, needle-punched polypropylene filter fabric and on the other
with a solid polymeric film. The film provides extra protection for water proofing
membranes under high static loads.
SURE-DRAIN-H consists of a high compressive strength, high
impact polystyrene core covered on one side with non-woven polypropylene geotextile
filter fabric.
SURE-DRAIN-HD uses a woven polypropylene filter fabric. The
fabric allows water to pass into the drain core while restricting the movement of soil
particles which might clog the core. The core allows water to flow to designated drainage
exists.
TYPICAL USE
SURE-DRAIN-V is designed for use in vertical, below grade
applications such as waterproofed foundation walls, retaining walls, and tunnels.
SURE-DRAIN-H is designed for use in horizontal applications
between concrete slabs or with pavers. SURE-DRAIN-HD is intended for use on horizontal
decks or in planters; overburden may be soil, concrete, or pavers. SURE-DRAIN is an
approved protection course over all Carlisle Waterproofing Systems.
LIMITATIONS
- Consult Carlisle Representative in the event of unusual soil
or environmental conditions. Hydrocarbon resistant versions of SURE-DRAIN composite are
also available.
- Not recommended for exposed conditions. Backfill should be
placed within 2 weeks to prevent damage.
- Construction traffic, vehicles and equipment should not be
allowed directly on the SURE-DRAIN.
- Do not use SURE-DRAIN-H with soil or compacted earth
overburdens.
PACKAGING
SURE-DRAIN is packaged in rolls 4' wide by 50' in length.
Other thicknesses, fabrics and configurations are available by special order.
STORAGE
Protect materials from excessive heat or cold. Store away
from open flames, sparks or welding. Protect from rain, direct sunlight or from any
harmful environment conditions during jobsite storage.
TECHNICAL DATA
ASTM TEST |
| PROPERTY |
METHOD |
TYPE "V" |
TYPE"H" |
TYPE"HD" |
| CORE |
|
|
|
|
| Color |
- |
Black |
Black |
Black |
| Thickness |
D-1777 |
0.25" |
0.437" |
0.25" |
| Compressive Strength |
D-1621 |
15,000 psf |
18,000 psf |
21,000 psf |
| FILTER FABRIC |
|
|
|
|
| Grab Tensile, Ibs. |
D-4632 |
115 |
200 |
410 X 285 |
| Flow Rate |
D-4491 |
170 gpm/ft2 |
80 gpm/ft2 |
26 gpm/ft2 |
| Opening(Std Sieve) |
D-4751 |
80 |
100 |
80 |
| Weight |
D-3776 |
4.0 oz/yd2 |
8.0 oz/yd2 |
6.6 oz/yd2 |
| Trapezoidal Tear Strength |
|
50 |
80 |
115 X 70 |
| Permeability cm/sec |
D-4491 |
0.20 |
0.10 |
0.011 |
| Puncture Strength, psi |
D-3787 |
70 |
130 |
165 |
| ASSEMBLY Flow
Rate |
D-4716 |
9 gpm/ftw |
15 gpm/ftw |
9 gpm/ftw |
|