CCW-TOTAL-DRAIN™ DRAINAGE SYSTEM

DESCRIPTION

The CCW TOTAL-DRAIN System consists of a 12" wide high profile drainage section with an integral transition section to couple it to standard SURE-DRAIN composites. The high profile section has a larger open area than perforated pipe to accept high flows from both the sheet drain and surrounding soils. The factory manufactured transition between the high profile section and sheet drain assures a secure drain path independent of field installation.

TOTAL-DRAIN consists of a highly compressive strength, high impact polystyrene core covered on one side with a non-woven polypropylene filter fabric and on the other with a solid polymeric film. The film provides extra protection for water proofing membranes under high static loads.

TYPICAL USE

The TOTAL-DRAIN System is used to replace perforated pipe/aggregate collection systems for drainage of foundation walls, retaining walls, and tunnels. TOTAL-DRAIN's unique high profile water collection section directs collected water to the drainage exits, eliminating the need for a separate drain system. This improves the drain performance while saving both time and money.

ADVANTAGES

• Replaces conventional pipe and aggregate drains with a more efficient drainage system.
• Faster installation and immediate backfill capability speeds job completion.
• Lower installed cost than pipe, fabric and aggregate methods.
• Provides a performed, continuous 100 gallon/minute flow path from all wall areas to collection points.
• 12000lb./sq. ft. compressive strength ensures drainage integrity during and after backfilling.

LIMITATIONS

• Consult Carlisle representatives for unusual soil conditions. Hydrocarbon resistant versions of TOTAL-DRAIN and SURE-DRAIN composites are also available.
• Not recommended for exposed conditions. Backfill should be placed within 2 weeks to avoid damage.
• Construction traffic and equipment should not be allowed directly on the TOTAL-DRAIN

TOTAL-DRAIN SYSTEM	CONVENTIONAL DRAIN