VANITYLITE™
| PRODUCT CODE |
VAN4 |
VAN5 |
VAN7 |
VAN8 |
VAN10 |
| STANDARD HOUSING LENGTH |
3'8" |
5'3" |
6'10" |
8'5" |
10'0" |
| NUMBER OF
LAMPS |
2 |
3 |
4 |
5 |
6 |
| CONTINUOUS LIGHTING |
39" |
58" |
77" |
96" |
115" |
RECESSED INSTALLATION INSTRUCTIONS:
- Place VanityLite unit in corner cavity shown in illustration
above. It is recommended that the VanityLite is installed at no less than 8'0"; no
greater than 9'0" height.
- Attach housing to finished ceiling through holes provided on
the VanityLite.
- Insert additional drywall sections into drywall envelope and
side wall of housing as illustrated on the right.
- Finish drywall work as usual, establishing a soffit ceiling.
- Use flanged end caps if no wall on side of unit. Use
standard if unit is against a wall.
- Complete electrical connections as illustrated above.
- Insert reflector.
ENERGY EFFICIENT VANITYLITE MEETS CALIFORNIA TITLE XXIV
REQUIREMENTS.
Product designed and developed by Glenn M. Johnson and
David C.J. Breda of Glenn Co. Breda and Associates Inc.
14009 Dinard Avenue, Santa Fe Springs, CA 90670
Tel. 562- 802- 8811 • 800- 233- 3563 • Fax 562- 802- 2882 |
