| LIGHTING Interior lighting is free from ultra-violet light, non-dazzling and
screened by light-conducting prisms.
ELECTRONICS
Unlike many competitors in our industry, our
state-of-the-art microprocessors are "standard features," rather than upgrade
options. Our Microtronik microprocessor is an electronic marvel that constantly monitors
and adjusts the temperature and humidity levels of each temperature zone. These
temperature displays are accessible and in plain sight on the front panel of each
unit. A three-level electronic controller enables the desired temperature for each
climate-controlled temperature zone to be set between 43°-76°F; desired and actual
temperatures are shown on digital LED displays. Additional switches control the main
electricity supply and lighting. Switches and controls are installed behind a hinged
cover flush with the front of the unit, therefore, there is no need to open or look
through the cabinet door (wood or glass, respectively) to satisfy any temperature
concerns. This standard feature not only increases temperature stabilization, but
also greatly reduces wear and tear on your equipment.
In addition to the electronic temperature sensors, there is
a thermal evaporation regulator ensuring precise climate control. Electrical fitting
makes all units ready-to-plug-in (a standard 120-volt, 10 amp electric supply is
required). The switchbox is encapsulated. The Fromagair climate-controlled areas
have a two-level electronic controller with a changeover switch for two (2) programmable
desired temperatures. A digital LED display shows desired and actual temperatures.
HOUSING
The outer structure of water-resistant chipboard and solid
wood is connected to the inner wall by a filling of rigid polyurethane foam, and together
these provide extremely effective insulation. The outer structure serves as a
substrate for genuine wood, veneer, or 18/9 chrome-nickel stainless steel as required.
INTERIOR
The interior construction consists of reflective aluminum
with stucco pattern, and multiple profiling lighting and temperature-sensors. There are
reinforced fixing points are shelving rails. All shelving is either powder coated
black or stainless steel depending on the finish ordered. Shelving racks can be ordered
for standard 750ml., 1.5 liter, champagne, burgundy, or bocksbeutel bottles. Bottles
larger than shelving accommodations can be placed inside the units. Display racks
are also available.
CHASSIS
The chassis is made of heavy profiled steel. lacquered and
equipped with four (4) nylon casters. Adjustments can be performed for leveling the
unit. A freestanding unit can be easily moved. Maintenance and cleaning
requirements are easily performed, even when storage is at maximum capacity. The
back of the unit is also accessible.
COMPRESSOR / FITTINGS COMPARTMENT
The compressor and fittings compartment are situated on top
of the chassis, open at the back and protected at the front by a plinth which is easily
removable.The equipment and switch-boxes are easily accessible. The unit
identification plate is located within this area.
We hope that this information has been informative.
Please fine the "Chambrair / Fromagair Modular System Operation, Performance,
Planning, and Specifications which follow. We are sure that you will have additional
questions and design issues. We look forward to assisting you, your designer,
builder and/or architect in designing your Wine Care System. Please feel free to
contact us at your convenience. |
