| GE
N E R A L I N F O R M A T I O N |
ETURA GENERAL INFORMATION
Maximum Flat Stock MAterial Length 144"
Maximum Modular MAterial Length is 143"
1. For Decks Going Against Walls, Order The Finished Length Plus 1 " Extra.
2. For Decks Going Against Appliances, Order The Finished
Length Plus 1/2" Extra For Each Finished End.
3. For Situations Like 1" Tops, Add 1/2" To Long
Side Measurement To Allow For Back Wall Triming. L Side Has 1 " Build Up At Edge.
Note! The Inside Comer Needs To Be Re-radiused. Longest Size 143".
4. For Custom Decks From Flat Stock, Order The Finished
Width Plus 3/4". Add 3" For Each Side Builddown Will Be Done On To Offset The
Loss of 1/8" Material For Saw Cuts. Order The Finished Length Plus 3/4". Add
3" For Each End The Builddown Will Be Done On. Round That Length "UP" To
The Nearest Inch.
5. For Custom Angled Decks, Measure The Back Side,
"Longest Sides", Of The Finished Deck, Add 1 " For Each Angled Seam. Also
Add 3 1/2" For Each Side & End Builddown Will Be Added To. To Order Round
"UP" To Nearest Inch In Length.
6. To Order Islands, Add 1/4" To Finished Width &
Length.
7. To Order Penninsula's, Figure The Finished Width Plus 1/4". Order The Finished
Length Plus 1 " To Fit To The Wall.
8. For Irregular Or Curved Custom Designed Decks, Order A Rectangular Piece Of Flat Stock
To Cover The Entire Project. Sometimes, The Rectangle May Need To Be Fused Together From
Flat Stock.
NOTE! Always Seam Multiple "SHORT" Seams In Lieu Of 1 Long Seam To Create
The Oversized Flat Piece. One Will Need To Add 3 1/211 Of Material To Each Side Buildclown
Will Be On.
9. Back Splash Can Be Put Up Seperately Or Fused & Covered Which Would Add
Considerable Time To Your Fabrication. One Can Order Flat Stock From 4 To 36" Widths
In 1 Foot Increments. Remember Saw Cuts Take Away 1/8" Of Material.
10. Seam Pouches Average 10' When Dispensed Properly! Large Kitchen Sinks Will Take 2
Pouches While Vanity & Bar Sinks Will Take 1 Pouch When Dispensed Properly! A 250 ML
Seam Tube Will Do About 4 Times More Area That A Pouch Will. The 250ml Tubes yield About
40 ft. Of Sinale Bead Seam When Properly Dispensed. |
