 |
HINGE REQUIREMENTS
- Never remove hinges until all spring tension has been released
- Do not lubricate these hinges at any time
- Do not disassemble these hinges at any time
- All hinges must have equal tension at all times
- Ensure hinges are aligned/levelled at all times
- Always use a minimum of two Tru•Close hinges on any gate/door
- Do not install a Tru•Close self-closing hinge (or hinges) on gates/doors carrying any other type of hinge or self-closing device
- After installation, cut, file or grind away any protruding bolts/screws
- Protect eyes during installation, wear safety goggles
WARRANTY & LIMITATION OF LIABILITY
The hinges will operate properly and warranty is valid only if installed in accordance
with instructions. If hinges malfunction within 2-years of date of purchase, the
manufacturer will repair of replace units at its discretion unless such malfunction is
caused by misuse of the hinges. Ensure hinges are kept free of ice, sand, and debris for
effective operation.
 Tel: 1-800-716-0888 or
714-430-1100 |