RETRO SYSTEM

Installs into existing downlight mounting frame, J-box, and mounting hardware. Trim flange completely covers old ceiling cutout. Consists, of precisely designed reflector, lampholder with pulse rated socket, flex, cap and wire; and ballast attached to J-box. (Voltage options must be specified). Accessory mounting clips are not required for all installations, however when needed specify mounting clip MC from accessories column. (Refer to Clip spec page for further information).

REFLECTOR

Reflector is available in thirty degree cutoff .30. Finishes are Clear A or Gold G Alzak for specular, durable reflectors.

BALLAST

Enclosed F-can, class P, HPF auto transformer is securely fastened to its own steel mounting platform. Supplied standard in 120V and 277V. Outboard mounting provides quiet cool operation.

ELECTRICAL

Allows 4-in / 4-out #12 AWG conductors rated at minimum 90° C. For use in damp locations. J-box and ballast are accessible through fixture.

LAMPS

To be used only with metal halide lamps rated for non-enclosure. Lamps are supplied with kit, lamp type must be specified, PAR for PAR lamps or ED for ED lamps. PAR lamps are available in 20°, 35° and 65° degree beam spreads

ACCESSORIES

E electronic ballast (consult factory)

G gold Alzak reflector

MC1 mounting clips for high hat style housings like H7, R10 and MX7.

MC2 mounting clips for die cast plaster frames.

MC4 bottom feed clips.

MC5 slide clips for flat plaster frames.

MC6 mounting clips for die cast aluminum mounting frames.

OT white oversize trim ring

120V HPF

TYPE:

PROJECT:

NOTES:

DESCRIPTION:

VALERIO ST.

NORTH

HOLLYWOOD,

CALIFORNIA

91605

PHONE

818 982 3701

FAX

818 982 3715