| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|


|
| |
|
| |
Complete Dewatering Complete Dewatering Complete Dewatering - Page 3
 |
 |
| COMPLETE
6" (152mm) VACUUM ASSISTED TRASH PUMP - 6" (152mm) pump combines
the performance of our wellpoint pump with the solids handling capacity of our trash pump.
It's dual use is quickly becoming the pump of choice where budget constraints allow the
purchase of only one pump. This pump will pass 3" solids and deliver up to 1600 gpm. |
COMPLETE
8" (200mm) TRASH PUMP - 8" x 8" solids handling
self-priming trash pump, cast grey, 30 iron construction with easily accessible cleanout
covers, two blade open type impeller capable of passing 3" spherical solids, hardened
steel impeller shaft, oil lubricated with heavy duty single row bearings, tungsten carbide
mechanical seal is oil lubricated for long life, suction end weighted flapper maintains
the prime of the pump during intermittent loads. This unit is capable of up to 2000 gpm. |
 |
 |
| 4"
WELL POINT PUMP - A versatile unit for small wellpoint systems or sock
drain applications. This unit has a single vacuum pump and economical 2 cylinder diesel
engine capable of pumping up to 600 gpm. |
8"
WELLPOINT PUMP - 8" centrifugal pump, grey iron type 30 volute,
enclosed bronze impeller, double grease lubricated seal with spring loaded grease cup,
replaceable bronze seal liner, two single-row ball bearings, hardened steel impeller
shaft, replaceable bronze wear ring. Pumping capacity to 2400 gpm. |
 |
 |
| COMPLETE
HIGH PRESSURE JET PUMP - These units are equipped with hand priming
systems and are available up to 1000 gpm @ 350' of head. |
10"
ELECTRIC WELLPOINT PUMP - Same specifications as above (8" Wellpoint
Pump) except pumping capacity to 4000 gpm. |
|
Copyright © 19962008 AECinfo.com
|
|