|
REMEDIAL
PRODUCTS
(Always Test Sample to
Determine Desired
Results) |
|
900X EXTRA STRONG DEGREASE & ETCH
Diedrich 90OX Degrease & Etch is formulated specifically for cleaning
grease, oil, scum, dirt, etc., from concrete, terrazzo, pre-cast concrete, etc. It's
ability to degrease and etch in one step makes it an excellent product for clean
up and surface preparation prior to epoxy, urethane coatings or paint, ceramic
tile, and new resilient flooring.
910 MARBLE CLEANER (ACIDIC)
Diedrich 910 Marble Cleaner is formulated for cleaning new and old marble
surfaces. It will remove iron stains, oil and scum, grease and other stains. It is
designed for rough face marble surfaces. LIMITATIONS: Do not use on
polished marble or granite.
910 PM (POLISHED MARBLE)
Ideal for cleaning polished marble, granite, terra cotta, glazed tile and other
surfaces where acidic cleaners cannot be used LIMITATIONS: Do not use on
polished black marble.
920 ASPHALT & TAR REMOVER
Diedrich 920 Asphalt & Tar Remover is an easy to use product formulated to
remove stains caused by tar asphalt, grease and oil from brick, concrete and
stone surfaces. Diedrich 920 Asphalt & Tar Remover is a fast-acting solvent
based cleaner that solubilizes asphalt and oil based materials for removal with
a cold water rinse. LIMITATIONS. Use in well ventilated areas, and do not use
on polished stone.
930 WHITE SCUM REMOVER
White Scum Remover Is formulated from inhibited acids and wetting agents
specially for the removal of white scum (insoluble salt stains) from brick and
stone masonry surfaces. 930 White Scum Remover can remove surface stains
which can occur when proper cleaning procedures for new masonry are not
employed. (i.e.: hazy, dull color; scaly residue on the face of the masonry).
940 IRON & MANGANESE STAIN REMOVER (FOR FERROUS STAINS)
940 Iron & Manganese Stain Remover is a specially formulated product for the
effective removal of iron, manganese, acid burn, straw stains and other
metallic stain/discoloration from brick, stone and concrete surfaces. Designed
to solve the problem effectively.
950 STAIN REMOVER
950 Stain Remover is a more productive mild blend of acids, inhibitors and
wetting agents for the removal of acid burn and vanadium (green or brown)
stains from brick masonry Diedrich 950 Stain Remover is safe and effective
for use on almost all masonry surfaces.
960 HEAVY DUTY CONCRETE CLEANER
Diedrich 960 Heavy Duty Concrete Cleaner is formulated for the removal of
dirt, rust, retarders, and mud stains from rough stucco and pre-cast finishes,
concrete with a heavily textured surface and sandblasted surface. This
formulation is ideal for the cleaning and etching of older concrete. It can be
used to clean exposed aggregate and concrete block. It can also be used as
an economical way to correct color and texture irregularities. When used on
colored, smooth white or gray concrete, use highly diluted. Also a limestone
restoration cleaner.
970 ALUMINUM CLEANER
Diedrich 970 Aluminum Cleaner is formulated to clean and remove oxidation,
scum, oil spots and weathering spots. It is an efficient surface restorer for most
aluminum surfaces.
980 GROUT & TILE CLEANER
For removal of excess grout from quarry tile, brick, slate floors, etc.
STAIN REMOVAL LIMITATIONS: Stain removal and control is dependent
on many variables in the substrates to be cleaned and on project
conditions. Control of metallic stains often depends on moisture
conditions and corrective measures should be taken prior to cleaning. |
|
7373 South 6th Street,
Oak Creek (Milwaukee), Wl
53154
(414) 764-0058 1-800-323-3565 |
