"SECUR-A-SEAL"
Patent #5,577,349
AUTOMATIC SECURITY DOOR BOTTOM
For new and existing Construction
No mortising required
Features and Benefits
Hallway Side:
clean design because it mounts on the INSIDE of the room
seals out light, noise, odor, smoke
protects the architectural finish of the door inside and outside
guards against illegal entry from the "Hook Tool"
tested for National Forced Entry requirement
can be de-activated from the hallway side for emergency ingress
allows express checkout
optional air make-up and still blocks light
Room Side:
architecturally pleasing slide covers available in champagne, aluminum, or dark duronodic
vacuum cleaners can not damage the door at the door bottom
makes rooms light tight and sound quiet
enhances the aesthetics of the room
HIGHEST LEVEL OF ASSURANCE IN THE INDUSTRY:
"SECUR-A-SEAL" was tested as a fully operational assembly along with the patented "CUSH 'N' SEAL" frame seals. It is the only sealing
system that tests to the allowable tolerances in manufacturing and field installation. Both "SECUR-A-SEAL" and "CUSH 'N' SEAL" were
tested to the ETC 100 for the existing national standards for the closing, sealing and securing requirements found in the existing codes of
NFPA 105, NFPA 80, ADA and the National Forced Entry. This assures the contractor who agrees to comply with other architectural
requirements such as AWI and SDI that hinge bind and lock bind will not be a punchlist problem.
DHSI offers a Factory Program of field assistance to contractors and installers to avoid related door and hardware problems.
"SECUR-A-SEAL" AND "CUSH 'N' SEAL"
together provide GUEST COMFORT and help secure the room against noise, light, odor and smoke.
Door and Hardware Systems, Inc.
13 Silver Street, Rochester, New York 14611
Tel: (716) 235-8543
Fax: (716) 235-0431
Website: DHSI-SEAL.com
Email: info@DHSI-SEAL.com
