Cylindrical Locks (Door Opening Systems

CYLINDRICAL LOCKS

SA MORMAN CO.gif (17474 bytes) DL1 Series/Spirit Grade 1 Extra Heavy Duty

The Dl 1 Series SPIRIT from Door opening Systems is an all new Grade 1, extra heavy duty lock.
Extra heavy duty because the Dl 1 Series SPIRIT Grade 1 significantly exceeds existing ANSI Grade 1 requirements for both torque and cycling. The DL 1 Series SPIRIT complies with ANSI A156.2, Series 4000, Grade 1.

Stainless Steel Construction Provides Increased Strength.
Three stainless steel leaf springs in both outside and inside lever support assemblies support lever operation independent of chassis and latch assembly and guarantee smooth lever operation. case hardened chassis spindle and sleeve, together with stainless steel locking tips, add the increased strength and durability required for Grade 1 use.

Increased Value With Important New Features in the DL 1 Series SPIRIT.
All new U.L. Listed grade 1 latchbolt with 9/16" throw requires only 40 degrees rotation of levers to fully retract. Installation is as easy as ever — the inside mounting plates now contain permanent studs that lock into chassis. And through-the-door thru-bolting is standard.

Two Year Warranty.
The performance of the new Dl 1 Series Grade 1 SPIRIT is backed up by D.O.S.'s two year limited warranty.

SUGGESTED ARCHITECTURAL SPECIFICATIONS
DL 1 Series Spirit Grade 1

Locksets will be DL 1 series from Door Opening Systems, made in America with a two year manufacturers warranty, and be certified to ANSI A156.2, Series 4000, Grade 1, and U.L. Listed. Levers to be solid cast, with no plastic inserts, minimum 5-1/2" overall length with supportive spring power totally independent of chassis or latch unit. Latchbolt to be minimum 9/16" throw and require only 40° rotation of levers for full retraction. Lockset fasteners to be concealed with thru-the-door thru-bolt attachment outside the 2-1/8" door prep.

broc01a.gif (7512 bytes)

SPECIFICATIONS-ST Series

FOR DOORS:	1-3/8" to 2" thick standard. factory adjusted for 1-3/4"
DOOR PREPARATION:	Fits standard 161 door prep
APPLICATION:	Through door thru-bolting standard
BACKSET:	2-3/4" only. Guarded
CASE:	Heavy gauge cold rolled steel mechanism. Yellow chromate plate. Case hardened spindles.
FRONT:	2-1/4" x 1-1/8", Beveled 1/8" on 2". Stainless steel, wrought brass, or wrought bronze.
STRIKE:	Stainless steel, wrought brass, or wrought bronze. 4-7/8" x 1-1/4" (ASA) "T" Strike optional
LATCHBOLT:	9/16" Throw. Adjustable front for flat or beveled doors 1/8" on 2"
HAND:	Non-handed
TRIM:	Levers are solid zinc diecast. Wrought brass roses. Concealed screws.
KEYS:	Two (2) per lock
KEYWAYS:	Available in keyways of most major manufacturers
INTERCHANGEABLE CORE:	Available for all keyed functions, 6 or 7 pin
CYLINDER:	6 pin cylinder keyed to 5 pins
KEYING:	Can be MK, CMK, GMK. Available Zero bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing masterkey systems of other manufacturers
FINISHES	US3(605), US4(606), US10(612), US10B(613), US26(625), US26D(626)
U.L./U.L.C. LISTED:	Listed for "A" label (3 hour) single swing doors (4'0"x8'0")
CERTIFICATIONS:	•Complies with ANSI A156.1, Series 4000, Grade 1 •Meets all accessibility requirements of the Americans with Disabilities Act •U.L. Listed

WARRANTY

Two year limited warranty

Cylindrical Locks-DL1 Series/Spirit Grade 1 Extra Heavy Duty-Page1