Overhead Holders/Stops Electro-Magnetic Door Holders Hospital Push/Pulls, Coordinators (Door Opening Systems

OVERHEAD HOLDERS/STOPS ELECTRO-MAGNETIC DOOR HOLDERS HOSPITAL PUSH/PULLS, COORDINATORS

Latch Protectors
Latch protectors provide security against burglars and vandals by covering the latch bolt and strike on the pull side of the door. These protectors can be used with cylindrical or mortise locks. All models are non-handed except 1807. Available in US32D, USP prime painted and US2G. 1810 is also available in painted to match bronze anodized
aluminum.


1806 For use with rose or escutcheon 2 3/4" wide or less. For use with Type 86 Mortise and Tye 161 Cylinder Locks (ANSI 156.13 Series 1000) (ANSI 156.2 Series 4000). 9 1/2" x 2 1/2" Available in 13 Gauge Stainless Steel (US32D), 12 Gauge Steel (USP Prime Painted) and 12 Gauge Steel (US2G finish).	1807 For use on aluminum doors with latch bolt and lock or electric strikes. 9 1 /2" x 3" Handed specify LH or RH when ordering. Available in 13 Gauge Stainless Steel (US32D), 12 Gauge Steel (USP Prime Painted) and 12 Gauge Steel (US2G finish).	1808 For use with rose or escutcheon 3 1/2" wide or less. For use with Type 86 Mortise and Tye 161 Cylinder Locks (ANSI 156.13 Series 1000) (ANSI 156.2 Series 4000). 9 1 /2" x 1 1 /2" Available in 13 Gauge Stainless Steel (US32D), 12 Gauge Steel (USP Prime Painted) and 12 Gauge Steel (US2G finish).	1809 For use with type 161 cylinder locks (APS11 S 6.2, series 2000) 7" x 1 1 /2" Available in 13 Gauge Stainless Steel (US32D), 12 Gauge Steel (USP Prime Painted) and 12 Gauge Steel (US2G finish).	1810 Integrated security pin to prevent door and frame from being pryed about. 11 1 /2" x 3" Available in 13 Gauge Stainless Steel (US32D), 12 Gauge Steel (USP Prime Painted) and 12 Gauge Steel (US2G finish). Sprayed to match bronze moderized AL.