Metal Vision Frames

VISION FRAMES - DOOR LOUVERS - EDGES & ASTRAGALS - FIRE & IMPACT RATED GLAZING MATERIAL & SECURITY PRODUCTS

METAL VISION FRAMES
STANDARD PRODUCT FEATURES

• 18 GA C.R.S. Frame (LoPro™ is 20 GA.)
• All styles should use glazing tape on one or both sides of the glass
• Standard Finishes - Grey Primer, Beige or Bronze Baked Enamel
• For use with 1/4” or 3/16” glazing material (LoPro ™ -IS up to 1" glass, FGS-IS up to 1-1/2” glass, and/or door thickness up to 2-1/4")
• Use with 1-3/4” Doors (1-3/8” = FGS-38 or LoPro ™ -IS-1 3/8)
• Two piece frame with mitered and welded corners
• Counter-sunk mounting holes for a flush appearance
  

OPTIONAL FEATURES

• Special order Baked Enamel Colors
• Plated Finishes to match the lock, hinges and closer
• Security Screw Fasteners
• Galvanized: Coil, Zinc Plated or Hot Dipped Metal
• #304 Stainless Steel #4 Finish (satin)
• Lead-Lined
• Mullions-18 GA. Steel Tubing, G-series
  

SPECIAL FEATURES

• LoPro™ - This design provides a Lo-Profile, “flush” to the door look, with a self attaching screw installation
• BFL-123 - Installs by fastening both sides of frame together without drilling holes thru the door, thus saving installation time
• FGS-75, BFL-75, FGS-38 and FGS-IS with thru bolt installation
• FGS-DBL is designed for use in applications, separating two 1/4” pieces of glazing material with a 1/4” spacer

NOTE: For Exterior use, High Humidity
or Salt Air Application, product must be
Galvanized or Stainless Steel.

IMPORTANT: Interpretation of building
and fire codes may vary. Consult with the
local authority having jurisdiction to deter-mine
appropriate standards in your area.

LoPro™& LoPro™-CS
LO-PROFILE FIRE RATED
METAL VISION FRAME

ROUND VISION FRAMES
Lo-FP-12 (12" Round)
Lo-FP-18 (18" Round) see IMAGE
Lo-FP-24 (24" Round)

SAMPLE CUSTOM SHAPES
(CONSULT FACTORY FOR OTHER STYLES)

Fire Rated
GLAZING MATERIAL
(with U.L. and W.H.I mark)
Tested - U.L. 10B, Negative Pressure
WIRE GLASS (1/4" Polished wire)

• Fire Ratings:
  20/45 minutes at 1296 square inches
  60/90 minutes at 100 square inches
  

FIRELITE (3/16" Clear-no wire)

• Standard-non polished surface
• Premium-polished surface
• Fire-ratings*
  20/45/60/90 minutes at 1296 sq. in. 90/180 minute at 100 sq. in. *Sizes over 1296 sq. in. available in certain applications. Consult factory for the most current testing information.
  

FIRELITE-PLUS (5/16" fire/safety)

• Premium grade (polished surfaces) clear no wire.
• Impact safety rated**
• Fire-ratings
  20 minutes at 2835 sq. in.
  45/60 minutes at 1296 sq. in.
  90/180 minute at 100 sq. in.
  

FIRELITE NT (3/16" Clear w/3M film)

• Firelite with applied abrasion-resistant surface film by 3M.
• Impact safety rated**
• Fire-ratings
  20 minutes at 2835 sq. in.
  45/60 minutes at 1296 sq. in.
  90/180 minute at 100 sq. in.
  

FIRELITE IGU (insulated unit)

• Fire-rated for up to 180 minutes with hose stream test
• Impact safety rated**
• Composed of Firelite products and tempered or annealed float glass
  

FIREGLASS-20 (Clear-no wire, 20 min.)

• Available in 1/4", 3/8", 1/2", 3/4"
• Fire-rated - 20 min. without hose stream
• Impact safety rated**
  

PYROSTOP (Clear - no wire)

• Available in 3/8", 3/4", 13/16", 1-1/16", 1-1/2", 2-1/8" thickness'
• Fire-rated for up to 90 min. - Doors & 2 hours - Walls (w/ hose stream test)
• Impact safety rated**
• Barrier to fire and smoke
• Use with LoPro™-IS or FGS-IS
  **Meets ANSI Z97.1 and CPSC 16CFR1201 (Cat. I & II)

LoPro™ -CS CHRISTIAN CROSS

*Must be installed w/ FireLite product & fire listed glazing tape in an appropriately tested door assembly
**Fire Rated up to 1080 sq. in. at 60/90 min. with Pyrostop - Consult Factory for specifics

POSITIVE PRESSURE - All Fire Rated Products meet test requirements of UBC 7.2-97 and UL 10C. For Current Info, Consult Factory or check our website