 |
VISION FRAMES - DOOR
LOUVERS - EDGES & ASTRAGALS - FIRE & IMPACT RATED GLAZING MATERIAL & SECURITY
PRODUCTS
|
LoPro ™ -IS
LO-PROFILE METAL VISION FRAME FOR SPECIAL SIZE GLASS OR DOOR THICKNESS
LoPro ™ -G LO-PROFILE METAL VISION FRAME WITH
FRENCH DOOR GRILLES
- Mullion Size: LoPro ™ -G (5/8"), BFL-123-G
(3/4"), FGS-75-G (3/4")
- LoPro ™ -IS-G is available for special glass thickness
- consult factory
- Fire Rated (see fire ratings chart)
GRILLE DESIGNS
(CUSTOM DESIGNING AVAILABLE CONSULT FACTORY)
G-2 G-3 G-4 G-6 G-9 G-9
G-5 G-6 G-8 G-10 G-12 G-15
DOOR LOUVERS
AFDL (Inverted Y)
- Top seller fastens the auxiliary frame to the louver core,
thru the cutout in the door, eliminating the need to drill holes in the door
- 18 GA. Frame, 22 GA. Louver Blades
- For a 1-3/4” Door (1-3/8” is available)
- AFDL-T -Transom Louver
FLDL-U.L. (Fire Rated w/ U.L. Label)
Fire Rated up to 90 min., Max. size 24 x 24
- 18 GA. Frame and Blades
- Self Attaching installation (see AFDL)
- Stainless steel operating spring assures proper action with
the 160 degree fusible link closing mechanism
ADL (Adjustable Z Blade)-not shown
- 18 GA. Frame and Louver Blades
- Self Attaching installation (see AFDL)
- For use in applications when an adjustable louver is
required, but a fire rating is NOT needed
FDLS (Inverted Split Y)
- 18 GA. Frame and Louver Blades
- Installs by means of sheet metal or wood screws directly
into the door
- Will fit any door thickness over 1 1/8”
- Completely Vision Proof
CHDL-2F (Inverted V, frame two sides)
- 18 GA. Frame, 20 GA. Louver Blades
- Installs, screwing directly into the door
- Vision Proof
CHDL (Inverted V, core only)-not shown
- Installs with stops on both sides
- Ideal for use in Transoms or Wood Doors
DRDL (Double Inverted V) - not shown
- 18 GA. Frame, 20 GA. Louver Blades
- Installs, screwing directly into the door
- For darkroom applications where
light cannot be present
SPECIAL FEATURES
- Standard Finishes - Grey Primer, Beige or Bronze Baked
Enamel
- Special Order Baked Enamel Colors
- Security Screw Fasteners
- Mesh Screens (18-14 mesh)
- #304 Stainless Steel #4 Finish(satin)
- Galvanized: Sheet, Zinc Plated or Hot Dipped Metal
- Aluminum #5052 (mill finish or anodized)
NOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized,
Stainless Steel or Aluminum
AFDL INVERTED Y LOUVER MOST PREFERRED
FLDL-UL FIRE RATED FUSIBLE LINK LOUVER
FDLS INVERTED SPLIT Y LOUVER
CHDL-2F INVERTED V LOUVER
POSITIVE PRESSURE - All Fire Rated Products meet
test requirements of UBC 7.2-97 and UL 10C. For Current Info, Consult Factory or check our
website
|
