Vision Frames/Door Louvers/Edges & Astragals/Fire Rated & Impact Rated Glazing Material & Security Products. (Door Opening Systems

VISION FRAMES - DOOR LOUVERS - EDGES & ASTRAGALS - FIRE & IMPACT RATED GLAZING MATERIAL & SECURITY PRODUCTS

METAL EDGES & ASTRAGALS

Metal Edges and/or Astragals are
required on all fire rated doors installed in
pairs. (Exception is W.H.I. labeled 20
minute doors with fire retardant treated
stiles.) Metal Edges and Astragals can be
Factory machined for hardware cutouts.

STANDARD PRODUCT FEATURES

20 GA. Edges, 18 GA. Astragals, C.R.S.
Install with #6x3/4” Phillips head sheet metal screws
Standard Finishes - Grey Primer, Beige or Bronze Baked Enamel
Counter-sunk mounting holes

OPTIONAL FEATURES
Special Order Baked Enamel Colors
Plated Finishes to match the vision frame, hinges, lock and closer
#304 Stainless Steel #4 Finish (satin)
Galvanized Sheet Metal
Special Hardware Preps
FIRE RATINGS (w/ U.L. & W.H.I. mark)
Tested - U.L. 10B, Negative Pressure
20/45/60/90 minutes

WOOD VENEER over METAL EDGES
AND ASTRAGALS
Available in common wood species
Ready to stain, seal and finish
Designed for interior use
FIRE RATINGS (with W.H.I. mark)
Tested - U.L. 10B, Negative Pressure
20/45/60/90 minutes

SECURITY VISION FRAMES AND LOUVERS

SECURITY VISION FRAMES
SL-IS (Special Door or Glass Thickness)
18 GA. Frame with 12 GA. Grille
(13/16” square perforations) both sides
Thru bolt installation
For use with glazing material 3/16” to
1-1/2” and door thickness up to 2-1/4”
Allows for visible lite and high security
Fire Rated Security Vision Frame

SG-10-SP (with Dbl Speak Port)
10 GA. C.R.S. frame for glazing 3/16” to 1-1/2” and door thickness up to 2-1/4”
Thru bolt installation
10 GA. DBL Speak Port w/ 5/32” dia. holes on 7/32” staggered centers SG-10 (without speak port)
Same construction as SG-10-SP without speak port SG-10-SSD (with Sliding Door Panel)
12 GA. Sliding Door Panel fits over SG-10 for selective viewing in High Security areas FGS-75-SC (with Operating Panel)
18 GA. hinged operating door with magnetic catch and finger pull
For use where visible lite is required but viewing security is necessary BR-7 (Bullet Resistant* and Fire Rated)
7 GA. C.R.S. Face Plate frame, with standard SG-10 (12 GA.) back plate Thru bolt installation
Glazing thickness ranges from 3/16" up to 1-1/2", depending on the bullet resis-tance, fire or attack standard required. *BULLET RESISTANCE TEST (Passed)
.44 Magnum and 12 Gauge Shotgun IMPACT TEST (Passed)
Sledge Hammer attack portion of C.D.C. test requirements

SECURITY LOUVERS
PLSL
Security Grille Face Plate/Frame are 12 GA. with 13/16” square perforations
Louver blades are 18 GA.
For use where air flow is required in a security or vandal proof application F DL-UL-SG2 (Fire Rated to 90 Min. Max Size 24x24)-Negative Pressure
Security Grille Face Plate and Frame are 12 GA. with 13/16” square cutouts
Fire Rated Fusible Link Louver FLDL-UL-SG1 (Fire Rated to 90 Min. Max Size 24x24)-Negative Pressure
Same as above with Grille One Side

SPECIAL FEATURES
Standard Finishes - Grey Primer,
Beige or Bronze Baked Enamel
Special Order Baked Enamel Colors
Security Screw Fasteners
Mesh Screens (PLSL only)
#304 Stainless Steel #4 Finish (satin)
Galvanized Sheet Metal

SPECIFICATION

FABRICATION
VISION FRAMES - (METAL) Shall be constructed of (select one): (18 GA. or 20 GA. Cold Rolled Steel) (#304 Stainless Steel #4 Finish) or (as deter-mined by specific model numbers) and shall have mitered and welded corners with counter-sunk mounting holes and metal fasteners.
LOUVERS - Shall be constructed of ________________GA. frame and ________________GA. louver blades, Cold Rolled Steel (Galvanized or Stainless Steel); with mitered and welded corners, and countersunk mounting holes with metal fasteners.
METAL EDGES and ASTRAGALS -Shall be constructed of 20 GA. edges and 18 GA. Astragals, Cold Rolled Steel (Galvanized or Stainless Steel) and countersunk mounting holes. Edges and Astragals will be pre machined to accept flush bolts, locks and strikes as per door hardware specifications. (WOOD, VENEER over METAL EDGES and ASTRAGALS) - Shall be constructed per above spec with wood veneer laminated to metal. Shall be listed with Warnock Hersey (W.H.I.) for fire ratings up to 90 minutes.

TEST RESULTS
VISION FRAMES - (METAL) U.L. listing number R10258 and W.H.I. listing book, for fire ratings of 20/45/60/90 and 180 minutes LOUVERS - (FLDL-UL & FLDL-UL-SG2) U.L., listing R7776, for up to 90 minute fire rating.
METAL EDGES and ASTRAGALS - (FMEA, FME & HEG) U.L. listing number R11816 and W.H.I. listing book for fire ratings of 20/45/60/90 minutes. (WOOD VENEER over EDGES AND ASTRAGALS) - W.H.I. listing at 20/45/60/90 minutes. Tested under U.L. 10B Negative Pressure. POSITIVE PRESSURE - All Fire Rated Products meet test requirements of UBC 7.2-97 and UL 10C. For Current Info, Consult Factory or check our website

FINISH
All Vision Frames, Louvers, Metal Edges and Astragals shall be pretreated with a degreasing rust inhibiting solution. Finish shall be (select one): Grey Primer, Beige or Bronze Baked Enamel or factory plated to match the door hard-ware finish, or special baked enamel color (as per sample supplied).

MANUFACTURER
All Vision Frame Models, Fusible Link Louvers for Fire Rated Doors Model, Fixed Blade Louvers, or Metal Edges and Astragals, shall be as manufactured for Door Opening Systems, Las Vegas, NV. in accordance to standards set forth by NFPA-80. All Fire Rated Vision Frames or Louvers shall bear the listing mark of Underwriters Laboratories and/or Warnock Hersey, and be visible without removal of the frame from the door.

DOOR PREPARATION
The door cutout size for vision frames and louvers shall be the same as the nominal order size of the unit, or as to comply with their own U.L. or W.H.I. list-ing procedure.

INSTALLATION
All D.O.S. products shall be installed as per the installation instructions.

PRODUCT AVAILABILITY AND COST
Door Opening Systems products are available at competitive prices through D.O.S. distributors in all market areas of the U.S. and Canada. Stock is main-tained in our most popular selling sizes and styles for quick shipment.

dosb55a.gif (4269 bytes)