PRODUCT
NUMBER |
|
FINISH |
APPROX.
SHIPPING
WT.(LBS.) |
SUGGESTED
LIST PRICE |
For L3100 Series Only
3055 tall Door Kit
US4, 10, 10B, 32D
US3, 9, 32 |
For doors up to 10 ft. tall |
628/313/335 |
|
$53.00
$70.00
$88.00 |
For L3600 Series Only
3655 Tall Door Kit |
For doors taller than 66" above bar
height.
Specify cylinder height & door height. |
|
3/4 |
$24.00 |
| Monitoring |
SPDT signal switch included in any L3000 or
L8000 Device
Double monitoring - 2 SPDT signal switches |
ADD ADD |
|
$60.00 $90.00 |
| Monitoring Kits |
Single switch kit P/N 91-0897-01
Double switch kit P/N 91-0897-02 |
|
|
$51.00
$81.00
|
For L3300 or L8300 Series Only
4009-01 Open-Back |
For 1-3/4" thick door |
C
|
|
$62.00
|
For L8300
Series Only
8360 Long Lip StrikeL8099 Dummy
Push Bar |
Stainless steel plate for jambs that project
outward 2-1/4" beyond centerline of door. |
C |
|
$29.00 |
| Bar with no mechanism for doors NOT requiring
exit devices but where matching appearance is desired. Specify: aluminum, hollow metal or
wood door. |
628/313/335
US4, 10, 10B, 32D
US3, 9, 32 |
|
$101.00
$210.00
$202.00 |
L8099M Active Dummy
Bar with Switch |
SPDT monitor switch in bar can be wired
normally open or normally closed to operate maglock, alarm, etc. No latching mechanism.
Specify: aluminum, hollow metal or wood door. |
628/313/335
US4, 10, 10B, 32D
US3, 9, 32 |
|
$165.00
$273.00
$300.00 |
| L8099MM |
with two SPDT signal switches |
Add to 8099M |
|
$30.00 |
For L8400 Series Only
L8455-01 Long Face StrikeL8460-17
Long Lip Strike |
For covering the previous jamb preparation
when replacing MS pivoted bolt locks where exit bar height is same as previous cylinder
height.
Stainless steel plate for jambs that project outward 2-1/4" beyond centerline of
door. |
US32D US32D |
|
$49.00 $30.00 |
For L3600 or L8600
Series Only
8650 Cylinder Escutcheon Kit |
To mount standard mortise cylinder (with M.S.
cam) outside.
For wall thickness over 1/4" |
Ritecoat
628/313/335
US4, 10, 10B, 32D
US3, 9, 32ADD |
|
$16.00
$23.00
$23.00
$28.00$30.00 |
For L8400 X D8600 Series Only
L8486 Astragal/CoordinatorL8446
Astragal/Extension
L8456 Astragal Only
L8466 Coordinator Only |
For 7' doors with 8400x8600 devices
(Not for use with centerhung doors)
to 10' tall doors
628/313/335
(Consult factory for special length 8466) |
628/313/335
628/313/335
6-1/2
628/313/335 |
10
3
3-1/2 |
$335.00
$46.00
$120.00
$215.00 |
| For Series L3300,
L3600, L8300, L8400, L8600 series (or Entry Trim) |
| 4036-01 Mortise Cylinder |
Five pin. Can be installed directly in latch
case of 8400, 8300 or 3300 |
628/313/335 |
1/2 |
$22.00 |
| For
L3100, L3700, L8100, L8200, L8700 or L8800 Series Only |
| L8736 Rim Cylinder |
Five Pin |
628/313/335 |
1/2 |
$23.00 |
